| | | | |
| TIM-LA OEM GPS Module ANTARIS Positioning Engin |
|
|
 |
With the LEA-LA GPS receiver module, u-blox sets new standards in the miniaturization. The dimensions of 17 x 22 mm is an area reduction by 40% compared to the TIM-Lx modules. While the traditional TIM form factor has become a widely accepted industry... more |
| TIM-4H ANTARIS 4 Programmable GPS Module with SuperSense Automotive and Mobile Terminal Applications |
|
|
|
The TIM-4H module combines high sensitivity with exceptionally low power consumption. The -158 dBm tracking sensitivity extends positioning coverage into places where GPS was not possible before, and enables solutions using smaller or covert antennas... more |
| Thermal OEM Heads |
|
|
 |
Ophir pioneered the compact self-contained laser power meter heads with built-in amplifiers. These heads are easy to install and give a calibrated voltage, proportional to power. They contain all the electronics needed including a speed up circuit to... more |
| Thermal Heads - High Powers 500W and up |
|
|
|
Ophir's high power heads are the most reliable and durable available. Included are the exclusive 10K-W head withstanding power densities at 10KW to 10KW/cm2, the FL500A fan cooled head for up to 500 Watts and the Comet series power pucks.... more |
| Thermal Heads - Medium Powers to 300W |
|
|
|
Ophir has a wide range of thermal measurement heads for average powers up to 300W. Included are the exclusive LP1 coating with the highest damage thresholds available for long pulses and continuous radiation. There are heads with apertures up to 65mm... more |
| Thermal Heads - Low Powers to 50W |
|
|
|
Ophir has the widest selection of heads for low average powers in the industry. From the popular 3A series that can reliably measure down to tens of microwatts and microjoules to the L50A for up to 50W continuous. There are various shapes and sizes of... more |
| TAPER PIN REAMERS |
|
|
 |
Taper Reamers are used for reaming tapered holes in work.
STRAIGHT / SPIRAL FLUTED
Material: HSS M-2, M-35, HSS Co8e
As per DIN / BS and ISO standards
MTS REAMERS and special reamers can be had on request.... more |
| Tool Masters India |
|
|
|
Manufacturers and exporters of Milling cutters,single and double angle Cutters,side and face,concave and convex,corner rounding,t-slot,woodruff keyseat and dovetail cutters,metal slitting saws,Gear Hobs,Gear Shaper and Shaving Cutters,End Mills,Reamers... more |
| Tool Masters India |
|
|
|
Manufacturers and exporters of Milling cutters,single and double angle Cutters,side and face,concave and convex,corner rounding,t-slot,woodruff keyseat and dovetail cutters,metal slitting saws,Gear Hobs,Gear Shaper and Shaving Cutters,End Mills,Reamers... more |
| TD Industrial 10017 9" Wood Band Saw |
|
|
|
Product Description
Motor: 120 V, 60 Hz, 2.3 A
Motor Speed: 1050 RPM
Drive System: Belt Drive
Throat Capacity: 9"
Maximum Cutting Depth: 3.14"
Table Size: 11-3/8" x 11-3/8"
Table tilt Range: 0 degree to 45 degree
... more |
| TD Industrial 10025 3 1/2inch Metal Bandsaw with Swivel Base |
|
|
|
Product Description
Power: 0.56HP, 3.5A
900Capacity: Round Ø3 1/2"
Square 3 1/2"×4 3/4"
450Capacity: Round Ø2 1/2"
Square 2 3/4"×2 1/2"
Bland Size:51"×1/2"
Model Number
... more |
| TD Industrial 10016 10 inch Heavy Duty Table Saw with Stand |
|
|
|
Product Description
Motor 120V/60HZ, 22.2A,3HP(2300W)
Speed 3400RPM
Blade 10"(254mm)
Model Number
10016... more |
| TD Industrial 10019 16" Variable Speed Scroll Saw |
|
|
|
Product Description
Popular size for cutting hard and soft woods 3/16” up to 2”.
Wood, plastic, extremely thin cuts on materials 3/32” to ½” thick
For tight radius work in thin materials 3/32” to... more |
| TD Industrial 10021 22 inch Variable Speed Scroll Saw, C-UL |
|
|
|
Product Description
Motor: 120V/ 60HZ, 1.25A
Motor Speed: 700~1400rpm
Max. cutting depth: 2-1/4"(60mm)
Max. cutting width: 22"(558mm)
Table size: 17-1/4"x9"(438mmx228mm)
Table tilting range:... more |
| TD Industrial 10188 Pocket Hole jig |
|
|
|
Product Description
Pocket hole jig
Model Number
10188... more |
| TD Industrial 10035 2/3 HP Reciprocating Saw |
|
|
|
Product Description
Gear driven: variable speed to 2400 spm
1-1/8” stroke
All ball bearing
110v, 60 hz, 5.5 amps, 600 watts, single phase
Overall length : 17”
Overall Dimensions: Height: 6.5", Length: 17"... more |
| TD Industrial 10022L Miter Saw with Laser Light, 4500 RPM, 9.0 Amps |
|
|
|
Product Description
TD Industrial 10022 is a miter Saw with laser light and 120V, 9.0 Amp motor power.
Model Number
10022L
Includes
-TD Industrial 10022L Miter Saw with Laser Light, 4500 RPM, 9.0... more |
| TD Industrial 10071 Sliding Compound miter Saw with Dual Rod, 4500 RPM, 2 HP |
|
|
|
Product Description
TD Industrial 10071 is a Sliding Compound miter Saw with dual Rod and 2 HP 120V motor power.
Model Number
10071
Features
-Transparent Blade Guard
-Hold Down Motor
... more |
| TD Industrial 10023 10" Compound Miter Saw, 13.0 Amps |
|
|
|
Product Description
TD Industrial 10023 is a Compound Miter Saw, with a 2 HP motor power.
Model Number
10023
Includes
-TD Industrial 10023 10" Compound Miter Saw, 13.0 Amps
Application... more |
| TD Industrial 10023L Compound miter Saw with Laser Light, 4500 RPM, 12.0 Amps |
|
|
|
Product Description
TD Industrial 10023L is a Compound miter Saw with Laser Light and 120V, 60 HZ ,12.0 Amp motor power.
Model Number
10023L
Includes
-TD Industrial 10023L Compound miter Saw with... more |
