| | | | |
|
|
| |
TDL |
 |
Schroedahl's pump protection unit so-called automatic recirculation valve automatically protects the pump against damage during low load. As soon as the flow through the pump approaches the "minimum flow" the bypass system opens and flow will be recirculated... more |
| |
TDM |
|
Schroedahl's pump protection unit so-called automatic recirculation valve automatically protects the pump against damage during low load. As soon as the flow through the pump approaches the "minimum flow" the bypass system opens and flow will be recirculated... more |
| |
TDC |
|
Schroedahl's pump protection unit so-called automatic recirculation valve automatically protects the pump against damage during low load. As soon as the flow through the pump approaches the "minimum flow" the bypass system opens and flow will be recirculated... more |
| |
Transmission Gears & Shafts of Tractors |
 |
Transmission Gears and Shafts manufactured by us are tested and verified for material durability, dimensional accuracy and precision. They are made out of EN 353 & 20 Mn Cr 5 material and the microstructure, hardness and grain-flow pattern are checked... more |
| |
Transmissions Shafts of Tractors & Automobile |
|
Made from superior quality raw material, our gear shafts are tested and verified for materials durability, dimensional accuracy and precision. And the micro structure, hardness and grain-flow pattern are checked to with stand operational conditions. The... more |
| |
Technical Requirement: |
 |
1. Heat treatment: Depth of carburized layer is 0.8~1.2, gear surface quenched hardness is HRC58~64, and the center hardness is HRC35~48.
2. Precision of semi finished gear before quenching according to JB179-83 standard.
3. Should be without oxide... more |
| |
Threads |
 |
with single and multi starts, up to pitch 4mm or 6 TPI. ... more |
| |
Timing belt pulleys |
|
XL, T 0,08 and others , pitch up to 6,25 mm or 1/4 " máx.... more |
| |
T Series oil free compressors and vacuum pumps |
 |
Specification
Design
- Rotary Sliding Vane
- Positive Displacement
- Carbon Vanes
- Monoblock with IP54 Motor (IP55 Available)
Arrangements
- Compressors fitted with:
- Intake filter
- Pressure relief valve
- Vacuum Pumps fitted with:
... more |
| |
T-shirt Bag Punch Machine |
 |
Features
Small dimension, easy to operate.
Blade mold may be specified by customer requirements.
Employed pneumatic device, greater safety.
Great stability and continuous high speed production
... more |
| |
Twin Die High Speed Inflation Machine for HDPE |
|
Optional Equipment
Air Compressor.
Corona Treator.
Auto Loader.
Rotary Die Device.
Embossing Roller.
Air Shaft.
In-Line Printing Machine.
... more |
| |
Two-Color High Speed Inflation Machine for HDPE |
|
Optional Equipment
Air Compressor.
Corona Treator.
Auto Loader.
Rotary Die Device.
Embossing Roller.
Air Shaft.
In-Line Printing Machine
... more |
| |
Two-Layer High Speed Inflation Machine for HDPE |
|
Optional Equipment
Air Compressor.
Corona Treator.
Auto Loader.
Rotary Die Device.
Embossing Roller.
Air Shaft.
In-Line Printing Machine
... more |
| |
TS12 Heat Sealer |
 |
Lako Tool is proud to announce the TS12 Heat Sealer. The TS12 is a precision heat sealer designed to produce heated crimp seals for flexible packaging materials.
The digitally controlled heat sealer allows independent upper and lower seal jaw temperature... more |
| |
THE LCA LOG SAW CUTTERS |
 |
These versatile computerized log cutting machines enable efficient and high quality cutting of rewound paper products in the dia. Range of 90 mm up to 340 mm. Simple and robust construction of machines allows easy adaptation to various products and high... more |
| |
Thermal joining press |
 |
Specially designed for insertion in a non-stop feeding chain at the input end of the machine, this press, of an original design, permits a maximum reduction of dead time in joining.
The particularity of this equipment is that it makes a weld between... more |
| |
Taking samples on the flowing product |
|
Tracability:
Following product quality increasingly demands inspection by sampling.
Effectively, sampling is the sole method which permits sufficient control of parameters such as:
- Weight before and after processing.
- Deformations (straightness... more |
| |
Tabtool |
|
Mansfield Board Machinery offer Tabtool stitch flap tooling the perfect solution for casemakers and printer slotters.
TABTOOL uses continuous one-piece serrated blade on the upper head against a free rotating polyurethane anvil on the lower head.
TABTOOL... more |
| |
Turning Equipment |
|
(1) OKUMA LB-12 CNC Turning Center (6" Dia. Capacity - 1 3/4" Dia. Bar)
(2) OKUMA LB-15 CNC Turning Centers (8" Dia. Capacity)
(1) HAAS 2L (8" Dia. Capacity)
(7) AMERA-SEIKE CNC Turning Centers (2" to 12" Dia. Capacity)
(1) TSUNAMI SWISS Turn, with... more |
| |
Telemetry |
|
Monitoring and control of wide area service networks and infrastructure requires the use of telemetry techniques. Capelrig provides complete telemetry solutions based upon a variety of communications media including low power radio, licensed VHF/UHF radio... more |
