|
|
Product Name: Encapsulated DC/DC Modules have 4:1 Input Range
Product Description
Emerson Network Power, a business of Emerson (NYSE:EMR), has announced the introduction of the Astec Industrial Series DC Converters (www.astecpower.com). Designed for wide input voltage applications, the new ASA Series models can deliver 6 and 10 Watts, while the AEE single-output series supplies 15 Watts from an input voltage range of 9 to 36VDC and 18 to 75VDC or 18 to 36VDC and 36 to 75VDC for the ASA 10W models.
With a selection of single and dual output voltages from 3.3 to 15VDC, these devices feature small, encapsulated DIP packages (1.25” X 0.8” for ASA models and 1” X 2” for the AEE models) fitting industry standard footprints. This makes them an ideal solution for a variety of uses where space is at a premium such as automotive, burn-in, IC fabrication equipment, test instrumentation and wireless/wireline applications.
All models meet 1500VDC input-to-output isolation requirements and have a demonstrated mean time between failures (MTBF) of 1 million hours. In addition to accepting a wide input voltage range, the units also operate over an extremely wide temperature range from -40ºC to 71ºC on 6 W and15W models or -40ºC to 60ºC on the 10W devices. All models offer overcurrent and short circuit protection with automatic restart.
These units are available ex stock at competitive prices. All models carry the CE Mark and are designed for RoHS compliance.
Astec Sales/Technical Contact:
Frank Vondenhoff
European Marketing Manager
ASTEC Power
Wiltonstraat 30
3905KW VEENENDAAL
The Netherlands
Telephone : +31 318 49 57 91
Facsimile : +31 318 49 57 99
E-mail :
frankvondenhoff@astec-europe.com
Website : www.astecpower.com
Company Details
The Power Management DesignLine site is managed by Editor Paul O'Shea.
Starting out his career in the "Live Music Capital" city of Austin, Texas more than 20 years ago, Paul began with testing the Texas Instruments Business Systems, and moved on... more
| More Products of this Company: |
1-amp battery charge controller supports universal Li-ion designs, 1-amp buck regulator can be programmed to one of four output voltages, 1-watt DC/DCs extend reliability, 120-W desktop medical supply carries Class I, II approvals, 200-V MOSFET has 95 percent efficiency, 200-volt MOSFETs tout best-in-class RDS, FOM, 20W power supplies are ideal drop-in replacements, 25 to 600W enclosed power supplies are available as single, dual and triple output units, 3-amp POLA regulators tout size, cost edge, 3A and 6A DC-DC converters feature integrated inductors, 3A buck regulator offers high frequency, small footprint, 500mA Inductive LED driver targets movie/flash mode applications, 60-watt AC/DC claims small-size, low-cost standard for medical, Adapters are CEC compliant, Altera unveils 65 nm Stratix III FPGA families and design tools, Battery charger accepts two power sources, Battery charger accepts two power sources, Boost converter operates from single cell, delivers 95% efficiency, Charge pump with flash timer delivers 600 mA for white LEDs, Charger's reference design clamps down on surge protection, Chip resistor handles 2 watts in 2512 case size, Chip takes aim at Ethernet devices, Cylindrical resistors target surge/pulse, extreme thermal apps, Data-center PDUs expand, add three-phase option, DC power system delivers up to 3900 W, DC-DC converters have low-noise zero-current/voltage switching, DC/DC conversion ICs pick up on power management, DC/DC converter family meets next-gen Intel processor specs, DC/DC converter for CDMA power amps integrate bypass FET, Design safer street lights with isolation transformers, Development board eases digital SMPS designs, Dual full-bridge MOSFET driver eases motor control, Dual N-channel power-MOSFET comes in SO-8 package, Dual output 2-phase synchronous controller operates from 2.75 V input, Dual-input bus converter is designed for ATCA systems, Energy harvesting modules provide key enabler for emerging applications, Energy meter ICs cut power losses, Evaluation board speeds up design time for processor power management applications, Evaluation board speeds up design time for processor power management applications, Fanless ATX power supply operates from 24Vdc input, Fast responding DC/DC meets 3-GHz DSP system requirements, First fast, high-power LED driver suits projection and lighting, First fast, high-power LED driver suits projection and lighting, Freescale delivers its first PoE/PD controller, Front-end can provide 5 kW in a 1U-high shelf, Graphics core controller targets notebook computers, High-voltage buck control ICs drive LED signage, Highly integrated LED display drivers focus on LED backlighting, Hot-swap front-end fills mid-power requirements, iMOTION motor drive module saves a year's software development, Integrated IC targets converged portable products, Integrated-inductor DC/DCs boost efficiency, thermal performance, LDO touts lowest quiescent current for automotives, LED driver enables brighter flash in camera-phones, LED driver eyes automotives, LED driver IC targets display backlight and flash/torch applications, LED drivers power high-brightness LEDs, Li-Ion/Li-Polymer charge management controllers have 1 A current output, Lighting IC with PFC advances ballast designs, Low leakage power supplies target commercial, medical apps, MAX253-transformator features 6000V isolation, MELF resistors target surge, pulse apps, MGV says 1-kW DIN supply can't get any slimmer, Micromodules simplify point-of-load applications to 48 amps, Multi-channel phototransistors target industrial apps, Multi-topology DC-DC regulators target consumer electronics, Network manageable cooling unit offers energy efficiency, Nonvolatile SRAM modules tout integrated reflowable battery, Nonvolatile SRAM modules tout integrated reflowable battery, Optocouplers deliver high reliability, P-channel load switches have integrated slew-rate control, POL converters optimize transient response and enhances system performance, POLA regulators reduce board space, offer flexibility and cost cutting options, Power management controllers target notebook CPU and GPU applications, Power management IC is the first for DaVinci, Power Management ICs are everywhere, Power management package is smallest front-end solution for ATCA, Power management solutions debut for cellular handsets, other portable devices, Power management unit is first with integrated buck-boost converter, charger, Power manager IC for NiMH coin cells maintains battery-backup, Power manager IC for NiMH coin cells maintains battery-backup, Power modules handle up to 8 amps, Reference design claims best-in-class for VR11 solutions, Santa Rosa core controllers boost Pd reporting accuracy, Schottky rectifiers offered in mini SMPC package, Single port power over ethernet controller simplifies PSE design, Sixteenth-brick delivers 33 watts for wireless, optical systems, Slim DIN supply delivers 240 watts, Smallest p-channel MOSFET optimizes power management, Smart load switches targets power-sensitive, sub-5V applications, Smart-UPS line offers higher power density in a smaller form factor, Switching regulator powers low input-voltage digital ICs, Thermal management solutions include support for Intel platform environmental control interface, TI digital signal controller manages 16 DC/DC converters, TI's DSP extends battery life in portable apps, UPS packs 1500 VA in 1U, Vicor extends 375-V Maxi family, Vicor's Maxi DC/DCs fill in 200-300 watt space, Voltage monitor provides precise and space saving solution, Zarlink upgrades BiCMOS process for power ICs |
| Related Products: |
1-amp battery charge controller supports universal Li-ion designs, 1-amp buck regulator can be programmed to one of four output voltages, 1-watt DC/DCs extend reliability, 200-V MOSFET has 95 percent efficiency, 20W power supplies are ideal drop-in replacements, 25 to 600W enclosed power supplies are available as single, dual and triple output units, 3-amp POLA regulators tout size, cost edge, 3A and 6A DC-DC converters feature integrated inductors, 500mA Inductive LED driver targets movie/flash mode applications, 60-watt AC/DC claims small-size, low-cost standard for medical, Adapters are CEC compliant, Battery charger accepts two power sources, Battery charger accepts two power sources, Boost converter operates from single cell, delivers 95% efficiency, Charger's reference design clamps down on surge protection, Data-center PDUs expand, add three-phase option, DC power system delivers up to 3900 W, DC-DC converters have low-noise zero-current/voltage switching, DC/DC converter family meets next-gen Intel processor specs, Dual full-bridge MOSFET driver eases motor control, Dual output 2-phase synchronous controller operates from 2.75 V input, Dual-input bus converter is designed for ATCA systems, Energy harvesting modules provide key enabler for emerging applications, Energy meter ICs cut power losses, Fanless ATX power supply operates from 24Vdc input |
|
|
|
|
