|
|
Product Name: Network manageable cooling unit offers energy efficiency
Product Description
American Power Conversion (APC), a global provider of power availability solutions, announces its InfraStruXure InRow SC cooling unit that provides predictable air conditioning for wiring closets and server rooms. This 12-inch wide (half-rack) self-contained cooling solution is capable of providing up to 7kW of cooling capacity, allowing IT professionals to place the unit right next to the heat load to deliver predictable, agile heat removal. The unit's localized heat removal reduces energy costs by removing heat at the source that would otherwise require greater fan horsepower over longer distances of ductwork. The InRow SC's plug and play design allows for rapid installation without the need for running refrigerant lines, providing remote heat exchangers, or contracted mechanical services.
Wiring closets and computer rooms have traditionally used building air conditioning to satisfy the cooling requirement in those environments. Higher power densities in networking switches, servers and other IT equipment have increased heat requirements well beyond the building air conditioning system.
"The new InRow SC provides our customers with a dedicated cooling solution that meets the challenging heat removal requirements of wiring closets and server rooms," said Bud Collins, general manager of APC's Cooling Solutions group. "These small rooms and wiring closets are heating up due to advances in server-based telephony, such as voice-over-IP and power-over-Ethernet. The InRow SC maximizes agility and availability in server rooms and wiring closets while minimizing total cost of ownership."
In addition, the InRow SC is easy to access and control with integrated network manageability via Web, SMNP, and Telnet, offering predictive failure notification. A patent-pending control technique measures and reports unit cooling capacity on the display interface for real-time capacity management. Its modulating capacity control and variable speed fans allow the InRow SC to provide the required amount of cooling to the IT equipment, even in lightly loaded situations. The automatic restart increases availability by returning cooling to IT equipment after a power outage, while the hot-swappable fan modules minimize the mean-time-to-recovery. With a modular and scalable design, the added agility enhances cooling deployments as demand increases and ease of installation minimizes deployment time and costs.
Available worldwide through APC's extensive network of channel partners, the InRow SC carries an estimated resale price of $7,200 USD. To learn more about APC and its data center solutions, please visit www.apc.com or call 800-877-4080.
Company Details
The Power Management DesignLine site is managed by Editor Paul O'Shea.
Starting out his career in the "Live Music Capital" city of Austin, Texas more than 20 years ago, Paul began with testing the Texas Instruments Business Systems, and moved on... more
| More Products of this Company: |
1-amp battery charge controller supports universal Li-ion designs, 1-amp buck regulator can be programmed to one of four output voltages, 1-watt DC/DCs extend reliability, 120-W desktop medical supply carries Class I, II approvals, 200-V MOSFET has 95 percent efficiency, 200-volt MOSFETs tout best-in-class RDS, FOM, 20W power supplies are ideal drop-in replacements, 25 to 600W enclosed power supplies are available as single, dual and triple output units, 3-amp POLA regulators tout size, cost edge, 3A and 6A DC-DC converters feature integrated inductors, 3A buck regulator offers high frequency, small footprint, 500mA Inductive LED driver targets movie/flash mode applications, 60-watt AC/DC claims small-size, low-cost standard for medical, Adapters are CEC compliant, Altera unveils 65 nm Stratix III FPGA families and design tools, Battery charger accepts two power sources, Battery charger accepts two power sources, Boost converter operates from single cell, delivers 95% efficiency, Charge pump with flash timer delivers 600 mA for white LEDs, Charger's reference design clamps down on surge protection, Chip resistor handles 2 watts in 2512 case size, Chip takes aim at Ethernet devices, Cylindrical resistors target surge/pulse, extreme thermal apps, Data-center PDUs expand, add three-phase option, DC power system delivers up to 3900 W, DC-DC converters have low-noise zero-current/voltage switching, DC/DC conversion ICs pick up on power management, DC/DC converter family meets next-gen Intel processor specs, DC/DC converter for CDMA power amps integrate bypass FET, Design safer street lights with isolation transformers, Development board eases digital SMPS designs, Dual full-bridge MOSFET driver eases motor control, Dual N-channel power-MOSFET comes in SO-8 package, Dual output 2-phase synchronous controller operates from 2.75 V input, Dual-input bus converter is designed for ATCA systems, Encapsulated DC/DC Modules have 4:1 Input Range, Energy harvesting modules provide key enabler for emerging applications, Energy meter ICs cut power losses, Evaluation board speeds up design time for processor power management applications, Evaluation board speeds up design time for processor power management applications, Fanless ATX power supply operates from 24Vdc input, Fast responding DC/DC meets 3-GHz DSP system requirements, First fast, high-power LED driver suits projection and lighting, First fast, high-power LED driver suits projection and lighting, Freescale delivers its first PoE/PD controller, Front-end can provide 5 kW in a 1U-high shelf, Graphics core controller targets notebook computers, High-voltage buck control ICs drive LED signage, Highly integrated LED display drivers focus on LED backlighting, Hot-swap front-end fills mid-power requirements, iMOTION motor drive module saves a year's software development, Integrated IC targets converged portable products, Integrated-inductor DC/DCs boost efficiency, thermal performance, LDO touts lowest quiescent current for automotives, LED driver enables brighter flash in camera-phones, LED driver eyes automotives, LED driver IC targets display backlight and flash/torch applications, LED drivers power high-brightness LEDs, Li-Ion/Li-Polymer charge management controllers have 1 A current output, Lighting IC with PFC advances ballast designs, Low leakage power supplies target commercial, medical apps, MAX253-transformator features 6000V isolation, MELF resistors target surge, pulse apps, MGV says 1-kW DIN supply can't get any slimmer, Micromodules simplify point-of-load applications to 48 amps, Multi-channel phototransistors target industrial apps, Multi-topology DC-DC regulators target consumer electronics, Nonvolatile SRAM modules tout integrated reflowable battery, Nonvolatile SRAM modules tout integrated reflowable battery, Optocouplers deliver high reliability, P-channel load switches have integrated slew-rate control, POL converters optimize transient response and enhances system performance, POLA regulators reduce board space, offer flexibility and cost cutting options, Power management controllers target notebook CPU and GPU applications, Power management IC is the first for DaVinci, Power Management ICs are everywhere, Power management package is smallest front-end solution for ATCA, Power management solutions debut for cellular handsets, other portable devices, Power management unit is first with integrated buck-boost converter, charger, Power manager IC for NiMH coin cells maintains battery-backup, Power manager IC for NiMH coin cells maintains battery-backup, Power modules handle up to 8 amps, Reference design claims best-in-class for VR11 solutions, Santa Rosa core controllers boost Pd reporting accuracy, Schottky rectifiers offered in mini SMPC package, Single port power over ethernet controller simplifies PSE design, Sixteenth-brick delivers 33 watts for wireless, optical systems, Slim DIN supply delivers 240 watts, Smallest p-channel MOSFET optimizes power management, Smart load switches targets power-sensitive, sub-5V applications, Smart-UPS line offers higher power density in a smaller form factor, Switching regulator powers low input-voltage digital ICs, Thermal management solutions include support for Intel platform environmental control interface, TI digital signal controller manages 16 DC/DC converters, TI's DSP extends battery life in portable apps, UPS packs 1500 VA in 1U, Vicor extends 375-V Maxi family, Vicor's Maxi DC/DCs fill in 200-300 watt space, Voltage monitor provides precise and space saving solution, Zarlink upgrades BiCMOS process for power ICs |
| Related Products: |
1-amp buck regulator can be programmed to one of four output voltages, 1-watt DC/DCs extend reliability, 120-W desktop medical supply carries Class I, II approvals, 200-V MOSFET has 95 percent efficiency, 200-volt MOSFETs tout best-in-class RDS, FOM, 20W power supplies are ideal drop-in replacements, 3A and 6A DC-DC converters feature integrated inductors, 3A buck regulator offers high frequency, small footprint, 500mA Inductive LED driver targets movie/flash mode applications, 60-watt AC/DC claims small-size, low-cost standard for medical, Adapters are CEC compliant, Battery charger accepts two power sources, Battery charger accepts two power sources, Boost converter operates from single cell, delivers 95% efficiency, Charge pump with flash timer delivers 600 mA for white LEDs, Charger's reference design clamps down on surge protection, Chip takes aim at Ethernet devices, Cylindrical resistors target surge/pulse, extreme thermal apps, Data-center PDUs expand, add three-phase option, DC power system delivers up to 3900 W, DC/DC conversion ICs pick up on power management, DC/DC converter family meets next-gen Intel processor specs, DC/DC converter for CDMA power amps integrate bypass FET, Development board eases digital SMPS designs, Dual output 2-phase synchronous controller operates from 2.75 V input |
|
|
|
|
