|
|
Product Name: Highly integrated LED display drivers focus on LED backlighting
Product Description
Advanced Analogic Technologies Incorporated (AnalogicTech), a developer of power management semiconductors for mobile consumer electronic devices, announced at the Electronica Trade Show today the AAT2830/31, a highly integrated Total Display Solution for handsets and other portable systems operating off a single-cell Li-ion battery. Built around a high efficiency, tri-mode charge pump, the new device delivers up to 600 mA of current for the growing array of lighting applications in today's portable systems including main and sub display backlighting, camera flash, and RGB or auxiliary status lighting. Individual driving circuits for each function are controlled by AnalogicTech's patented, single wire AS2Cwire (Advanced Simple Serial Control) serial digital interface.
"As handset and portable system designers expand their use of lighting functions to include main and subpanel backlights, camera flash with movie-mode capability, RGB status and keypad backlighting, any discrete implementation of these subsystems conflicts directly with the need to minimize system footprint," said Adolfo Garcia, Product Line Director for AnalogicTech. "By combining a high performance charge pump and backlight, flash and RGB drivers into a single 4 x 4-mm IC controllable by a serial interface, the AAT2830/31 reduces parts count and system footprint while offering designers an exceptionally high level of configurability."
The AAT2830/31 drives up to six outputs programmable up to 30 mA each via an external resistor for LED backlight applications. Individual control of each channel allows designers to drive four LEDs for a main display and two for a sub panel, or all six for a single display. LED intensity can be set to any of 16 levels using the AS2Cwire serial interface.
For camera flash functions, the AAT2830/31 supplies up to 600 mA of current through four individual channels programmable up to 150 mA each. In addition, the AAT2830/31 supports both flashlight and movie-mode operations. Three auxiliary outputs can be adjusted to handle up to 60 mA for color RGB, keypad, or status lighting applications. The AAT2830/31's high efficiency tri-mode charge pump provides enough power to operate all three types of LED functions - backlight, flash and RGB - simultaneously.
All settings for backlight, flash and RGB lighting are programmable via AnalogicTech's AS2Cwire interface. Color RGB drivers on the AAT2830 can be programmed into up to 4096 color/keypad intensity settings. For portable devices using smaller-scale displays, the AAT2831 offers RGB drivers programmable to 64-color/keypad intensity combinations.
To protect the LEDs from thermal damage, the AAT2830/31 also features an integrated Flash timer, which limits the maximum amount of time the LEDs can be illuminated. This unique feature also helps minimize battery drain during flash operations.
Specified over the -40°C to +85°C temperature range, the AAT2830/31 will be sampling in December 2006 and will be available in a Pb-free, thermally-enhanced, 24-pin QFN44 package. Budgetary pricing will be $1.96 in 1000-unit quantities .
Company Details
The Power Management DesignLine site is managed by Editor Paul O'Shea.
Starting out his career in the "Live Music Capital" city of Austin, Texas more than 20 years ago, Paul began with testing the Texas Instruments Business Systems, and moved on... more
| More Products of this Company: |
1-amp battery charge controller supports universal Li-ion designs, 1-amp buck regulator can be programmed to one of four output voltages, 1-watt DC/DCs extend reliability, 120-W desktop medical supply carries Class I, II approvals, 200-V MOSFET has 95 percent efficiency, 200-volt MOSFETs tout best-in-class RDS, FOM, 20W power supplies are ideal drop-in replacements, 25 to 600W enclosed power supplies are available as single, dual and triple output units, 3-amp POLA regulators tout size, cost edge, 3A and 6A DC-DC converters feature integrated inductors, 3A buck regulator offers high frequency, small footprint, 500mA Inductive LED driver targets movie/flash mode applications, 60-watt AC/DC claims small-size, low-cost standard for medical, Adapters are CEC compliant, Altera unveils 65 nm Stratix III FPGA families and design tools, Battery charger accepts two power sources, Battery charger accepts two power sources, Boost converter operates from single cell, delivers 95% efficiency, Charge pump with flash timer delivers 600 mA for white LEDs, Charger's reference design clamps down on surge protection, Chip resistor handles 2 watts in 2512 case size, Chip takes aim at Ethernet devices, Cylindrical resistors target surge/pulse, extreme thermal apps, Data-center PDUs expand, add three-phase option, DC power system delivers up to 3900 W, DC-DC converters have low-noise zero-current/voltage switching, DC/DC conversion ICs pick up on power management, DC/DC converter family meets next-gen Intel processor specs, DC/DC converter for CDMA power amps integrate bypass FET, Design safer street lights with isolation transformers, Development board eases digital SMPS designs, Dual full-bridge MOSFET driver eases motor control, Dual N-channel power-MOSFET comes in SO-8 package, Dual output 2-phase synchronous controller operates from 2.75 V input, Dual-input bus converter is designed for ATCA systems, Encapsulated DC/DC Modules have 4:1 Input Range, Energy harvesting modules provide key enabler for emerging applications, Energy meter ICs cut power losses, Evaluation board speeds up design time for processor power management applications, Evaluation board speeds up design time for processor power management applications, Fanless ATX power supply operates from 24Vdc input, Fast responding DC/DC meets 3-GHz DSP system requirements, First fast, high-power LED driver suits projection and lighting, First fast, high-power LED driver suits projection and lighting, Freescale delivers its first PoE/PD controller, Front-end can provide 5 kW in a 1U-high shelf, Graphics core controller targets notebook computers, High-voltage buck control ICs drive LED signage, Hot-swap front-end fills mid-power requirements, iMOTION motor drive module saves a year's software development, Integrated IC targets converged portable products, Integrated-inductor DC/DCs boost efficiency, thermal performance, LDO touts lowest quiescent current for automotives, LED driver enables brighter flash in camera-phones, LED driver eyes automotives, LED driver IC targets display backlight and flash/torch applications, LED drivers power high-brightness LEDs, Li-Ion/Li-Polymer charge management controllers have 1 A current output, Lighting IC with PFC advances ballast designs, Low leakage power supplies target commercial, medical apps, MAX253-transformator features 6000V isolation, MELF resistors target surge, pulse apps, MGV says 1-kW DIN supply can't get any slimmer, Micromodules simplify point-of-load applications to 48 amps, Multi-channel phototransistors target industrial apps, Multi-topology DC-DC regulators target consumer electronics, Network manageable cooling unit offers energy efficiency, Nonvolatile SRAM modules tout integrated reflowable battery, Nonvolatile SRAM modules tout integrated reflowable battery, Optocouplers deliver high reliability, P-channel load switches have integrated slew-rate control, POL converters optimize transient response and enhances system performance, POLA regulators reduce board space, offer flexibility and cost cutting options, Power management controllers target notebook CPU and GPU applications, Power management IC is the first for DaVinci, Power Management ICs are everywhere, Power management package is smallest front-end solution for ATCA, Power management solutions debut for cellular handsets, other portable devices, Power management unit is first with integrated buck-boost converter, charger, Power manager IC for NiMH coin cells maintains battery-backup, Power manager IC for NiMH coin cells maintains battery-backup, Power modules handle up to 8 amps, Reference design claims best-in-class for VR11 solutions, Santa Rosa core controllers boost Pd reporting accuracy, Schottky rectifiers offered in mini SMPC package, Single port power over ethernet controller simplifies PSE design, Sixteenth-brick delivers 33 watts for wireless, optical systems, Slim DIN supply delivers 240 watts, Smallest p-channel MOSFET optimizes power management, Smart load switches targets power-sensitive, sub-5V applications, Smart-UPS line offers higher power density in a smaller form factor, Switching regulator powers low input-voltage digital ICs, Thermal management solutions include support for Intel platform environmental control interface, TI digital signal controller manages 16 DC/DC converters, TI's DSP extends battery life in portable apps, UPS packs 1500 VA in 1U, Vicor extends 375-V Maxi family, Vicor's Maxi DC/DCs fill in 200-300 watt space, Voltage monitor provides precise and space saving solution, Zarlink upgrades BiCMOS process for power ICs |
| Related Products: |
3A and 6A DC-DC converters feature integrated inductors, 3A buck regulator offers high frequency, small footprint, 500mA Inductive LED driver targets movie/flash mode applications, Altera unveils 65 nm Stratix III FPGA families and design tools, Battery charger accepts two power sources, Battery charger accepts two power sources, Boost converter operates from single cell, delivers 95% efficiency, Charger's reference design clamps down on surge protection, Chip takes aim at Ethernet devices, DC power system delivers up to 3900 W, DC/DC conversion ICs pick up on power management, Development board eases digital SMPS designs, Dual full-bridge MOSFET driver eases motor control, Dual output 2-phase synchronous controller operates from 2.75 V input, Dual-input bus converter is designed for ATCA systems, Energy harvesting modules provide key enabler for emerging applications, Energy meter ICs cut power losses, Evaluation board speeds up design time for processor power management applications, Evaluation board speeds up design time for processor power management applications, Freescale delivers its first PoE/PD controller, High-voltage buck control ICs drive LED signage, iMOTION motor drive module saves a year's software development, Integrated IC targets converged portable products, Integrated-inductor DC/DCs boost efficiency, thermal performance, LED driver enables brighter flash in camera-phones |
|
|
|
|
