Everything Engineering
Login:   Password:
Not Register?    Sign Up NOW!
Date: 05 September 2008
Google
 
System Three u-TAH Cartridge  
Search Country   Reset filter

Product Name: System Three u-TAH Cartridge

Product Description

Simplicity in epoxy adhesive use has finally arrived! Just drop System Three\'s new cartridge into a standard size caulking gun, add a mixer tip and squeeze and apply. What could be easier? Only need a little bit and don\'t want to use a tip? Then squeeze out some into a cup, mix and apply. In either case the cartridge properly measures the resin and hardener and can never get the ratio wrong. After you\'re done put the cap back on and the cartridge is ready to go whenever you next need it. We offer the following products: QuickCure 5, T-88 Structural Adhesive, SilverTip GelMagic, QuikFair and MetlWeld in the U-TAH Cartridge. QuickCure 5 is our quick setting epoxy adhesive. With QuickCure 5, you will have 2-3 minutes of working time and your joint will be tack free in 5-minutes. Our structural epoxy adhesive, T-88, is also available in cartridges for jobs that require longer pot life and overnight cure. If your application requires a sag-resistant adhesive, SilverTip GelMagic is for you. If you are bonding dissimilar substrates, MetlWeld will stick to a variety of surfaces including wood, metal, glass, etc. QuikFair is an outstanding fairing compound, made even easier to use on small jobs with the U-TAH Cartridge. With the U-TAH Cartridge there is never any need to measure the part A and the part B. The dual chambered cartridge does that for you and the Mixing Tips blend the resin and hardener as the product is dispensed there is never any need to mix. If you’d prefer to dispense into a cup or other mixing vessel, use our convenient Ratio Check Cap (great for mixing small quantities). If you have never applied epoxy products with a dispensing gun you will be amazed when you try our new U-TAH Cartridge. They take all the measuring and mixing out of the process of using epoxy. All you have to do is point and shoot. The mixing tip will put the precise amount of epoxy exactly where you want it with no mess and minimum waste.

Company Details

has been delivering the highest quality adhesives and coatings to woodworkers, boatbuilders and industry for over two decades. Our Catalog, Price List and current version of our helpful Epoxy Book are available for download in more

More Products of this Company: About The SilverTip Marine Epoxy Series, Board Defense, Clear Coat Laminating Resin, EndRo Kit, Impel Rods, Mirror Coat, Phase Two Laminating System, Quick Cure 5, 15, Rot Fix, SB-112, Sculpwood Moldable Epoxy Putty, SilverTip EZ-Fillet, SilverTip GelMagic, SilverTip Laminating Resin, SilverTip MetlWeld, SilverTip QuikFair, Spar Urethane Varnish, System Three General Purpose Resin, T-88 Structural Epoxy Adhesive, WR-155 Epoxy Primer, WR-LPU Linear Polyurethane Topcoat
Related Products: About The SilverTip Marine Epoxy Series, Board Defense, Clear Coat Laminating Resin, EndRo Kit, Impel Rods, LOW VISCOSITY RESIN, Mirror Coat, Phase Two Laminating System, Quick Cure 5, 15, Rot Fix, SB-112, Sculpwood Moldable Epoxy Putty, SilverTip EZ-Fillet, SilverTip GelMagic, SilverTip Laminating Resin, SilverTip MetlWeld, SilverTip QuikFair, Spar Urethane Varnish, System Three General Purpose Resin, T-88 Structural Epoxy Adhesive, WR-155 Epoxy Primer, WR-LPU Linear Polyurethane Topcoat
Home | Members.Benefit | Privacy.Policy | Bookmark.This.Page | Contact.Us
© 2006 - 2007 4engr. All Rights reserved |Recommended Engineering Sites:| Center for Respect of Life and Environment | Internet Dictionary|Enginering intent(Engineering Events) | Map Archive