|
Product Name: WY-C08GS
Product Description
Model WY-C08GS series are actuated by Cylinder. They provide high thrust because of their greater range of supply pressure, and also can provide a long stroke. Cylinder-type actuators, are suitable for applications where compactness or a higher thrust than that of diaphragm actuators are required. They are also installed for on-off, emergency shut-off control system.
Specification: -
1)Body: -
Type: Single seated, direct or reverse type, globe valve.
3 way diverting or mixing type.
Material: Cast iron (FC250), Ductile iron (FCD450),
Carbon steel (SCPH2),
Stainless steel (SCS13, SCS14)
Size: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 3", 4", 5", 6".
End connection: Flanged end (FF, RF).
Rating: JIS10k, 20k, 30k. ANSI 150, 300, 600lb.
Bonnet: Plain bonnet (0-under 200C)
Radiator finned bonnet (200C or over).
Packing: V-teflon, Asbestos yarn and Carbon graphite.
Guide: Top and bottom guide, top guide.
2)Trim: -
Valve plug: Single seated, three-way
Plug form: Teflon seat plug for on-off service
Material: Stainless steel (SUS304, SUS316 with stellite coating furnished to the seat).
3)Actuator: -
Type: Spring return cylinder actuated, direct or reverse.
Double-action cylinder acuated.
Cylinder material: Aluminum Alloy, Anodized.
Operating air pressure: 3~5kg/cm2.
Pneumatic tubing connection: 1/4" female tap.
Ambient temperature: -20 ~ +60C
4)Valve action: -
Air to open or air to close by using direct or reverse actuator.
5)Accessory: -
Handwheel
Positioner, limit switch, air set & lubricator
6)Performance: -
Leakage of full closure: Class VI
7)Service: -
For steam, air, water, oil and other fluids.
Operating Air Pressure: 3-5 kg/cm2G
8)Remark: -
Up to 4" are double acting cylinder actuator.
Connection Rating JIS 10K.
|
