Switch two relays on and off with one transmitter stick!
Normally open and normally closed solder points provided for each relay. You can
drive two independent motors, contactors or pneumatic/hydraulic solenoids. Plus
a simple wiring configuration also converts this to a mechanical H-bridge which
is perfect for running a single linear actuator or motor in both
forward/off/reverse.
When used with an actuator, optional inputs from limit switches permit you to
arrest motion in either direction. Silver cadmium oxide relay contacts. Maximum
motor/coil load: 12 amps at 30 volts DC inductive.
Fault detection safely switches off both relays if receiver signal is lost.
Dimension: 1.85" x 2.70" x 1.10"
