|
Product Name: MagneW 3000 PLUS Smart Electromagnetic Flowmeter Model NNK140/941
Product Description
OVERVIEW: -
The MagneW3000 PLUS Electromagnetic Flowmeter is submersible type of flowmeter
mainly used for flow rate measurement in open or closed channels. This flowmeter is simple in
operating principle and easy to install but provides high measuring accuracy. These features
are unattainable with other traditional electromagnetic flowmeters. The following out-standing
features of the MagneW3000 Flowmeter come from the square-wave excitation system.
FEATURES: -
• The detector can also be easily installed on any gate of an existing water channel. The channel may be an open or close type with rectangular or circular cross section.
• The construction is simple, having no moving parts. The flowmeters have sturdy resistance against
staining, clogging or corroding if a fluid contains suspensions or adherents.
• The flow signal is linear, having a high measuring accuracy from 100% down to zero flow rate. Stable
measurement can be done even when the channel is affected by the tide.
• A wide measuring range of 0 - 0.3 to 0 - 10 m/sec.can be covered. Still larger flows can be measured
at the same water head by installing dummy detectors in parallel with the detector which are of the
same physical dimensions.
• If the weir cannot be installed on the downstream of the detector, the weir with an elbow flange is conveniently used.
• The elbow flange is covered with a cover (optional), realizing expand- ability from a small to
large flow rate measurement.
• The detector body is made of plastics, resulting in light and corrosion resistant structure.
• Installation is simple, greatly reducing the cost and time for the engineering work. The detector and the
converter can be connected with one 4-core cable for signals and excitation.
SPECIFICATIONS: -
Flow velocity range:
0-0.3 to 0-10 m/s (Continuously adjustable)
* Recommended upstream velocity condition: 1 to 4 m/s
Power supply
100,110/115,120,220,230/240V AC ± 10%,
50/60 Hz ±2 Hz
24V DC ± 10%
Power consumption
Approx. 14W (Including detector and converter)
Detector
Material of body:
Rigid vinyl chloride
(Parts in contact with fluid: SUS304) [Resisting (internal,
external) pressure = 0.5 kg f/cm2]
Materials of electrodes
SUS316L, Titanium
Structure
Open channel type
(equivalent to JIS C 09 20 Underwater Type)
Cables (10m for each cable)
One 4-core shielded cable (outer diameter 11.4 mm;
length 10 m) with cable protection vinyl tube (outer
diameter 22 mm; length 10 m)
Electrical conductivity of the measured fluid
5 µS/m (5 µS/cm)
Ambient temperature limits
0 to 40°C
| Related Products: |
Noise Dosimeters, Space and Airborne Systems, 1-watt DC/DCs extend reliability, 1/3 & 3/4 HP Fixed Speed, Variable Length Turbines, 10-BASE T, 100 Mhz Antenna, 100 Mhz Bistatic Ant, 108FC (Globe) / 108FCA (Angle), 108FPS PUMP SUCTION CONTROL VALVE, 190 and 191 Splicers, 1965 Bobst SP 1260E, 1973 Miehle 6 color, 50", 1988 Vega 750, 1989 Bobst Domino 90, 1995 Sakurai Oliver 272 EPII, 2 HP Fixed Speed, Variable Length Turbines, 2.5-Megapixel CMOS Industrial Camera, 200 Mhz Antenna, 2001 SBL 1300 SEF Foil Stamper, 20W power supplies are ideal drop-in replacements, 2300RG MELLTRONICS DRIVES, 25 to 600W enclosed power supplies are available as single, dual and triple output units, 2600RG MELLTRONICS DRIVES, 265A Photomultiplier Base, 270 MHz Antenna |
| Suitable For: |
-
|
|
|
|
