|
Product Name: DC ACCESSORIES (BISON DRIVE - SCR CHASSIS/NEMA 4X)
Product Description
Bison's SCR speed controls are dual voltage drives that can control speed or torque. When torque is selected, the functions of the speed and torque pots change. The external potentiometer sets the torque reference, the on-board torque pot sets maximum speed and the on-board Max Speed pot sets maximum torque.
Specifications
Input Voltage: 115/230 VAC +- 10%, 60/50 Hz, Single Phase
Output Voltage: 0-90 or 0-180 VDC
Form Factor (AC amps/DC amps): 1.37
• Accel/Decel range 0.5 to 17 seconds.
• User adjustable calibration pots: IR compensation, min speed, max speed, torque, acceleration and deceleration.
• Diagnostics: LEDs for power and current limit status.
• Stopping Modes: Coast to minimum speed or to stop with selectable N.O. or N.C. inhibit contacts. Decelerate ti minimum soeed via the pot circuit. Braking on enclosed reversing models.
• Spade and screw terminals: Easy to use spade terminals on chassis. Screw terminals on enclosed units.
• Flexible inhibit: Select with jumper pins the preferred inhibit functionality.
*: Heatsink part-number 170-990-0100 required above 5 amp DC.
| Related Products: |
"HIGH PERFORMANCE GAS DRIVE" K-18, "HIGH PERFORMANCE GAS DRIVE" K-18 G, "HIGH PERFORMANCE GAS DRIVE" K-30G, "HIGH PERFORMANCE GAS DRIVE" K-50 G, "HIGH PERFORMANCE GAS DRIVE" K-70, "THE QUIET MACHINE" K-50, "The Ultimate Performance Rotary Screw Air Compressor" HERCULES 15, 20, 25, 30 & 40 Horsepower Models, "The Ultimate Performance Rotary Screw Air Compressor" HERCULES 40, 50 & 60 Horsepower Models, .965in Male - 1.25in Female Adapter, 1 GPM Electrocoagulation System, 1.25" Extension Tube, 3" Push Back, Drop-in, 1.25in Dropin Extension Tube with 1in Eye Piece Push Back, 1.25in Male - 2in Female Adapter, 1.25in Threadin Extension Tube with 1in Eye Piece Push Back, 1.5-Ton pipe roll, 1/3 & 3/4 HP Fixed Speed, Variable Length Turbines, 100SB Series PathfinderTM Heavy Duty Rotating Light, 102 Series Triliptical Stackable Status Indicator, 11) KNIGHT AIR ROLL HANDLING SYSTEM, 12" bench top positioner Welding Positioners, 12-Ton pipe roll, 12-Ton vessel roll vessel turning rolls, 12mm Inline Geared Motors (Square / Double Ended Type), 12mm Small DC Motors, 16" positioner (tilt adjust) Welding Positioners |
|
|
|
|
