One axis servo position control module
The DM-05 is a one axis controller module out of the Delem modusys architecture. The control function and settings of the module are software programmable via the machine parameters in the DA-60 series control units.
This module features the same advantages as a DM-01 module, but it is equipped with much more I/O pins.
The DM-05 utilizes the 24Vdc power supply which is often available in the machine control box. Due to the relatively low power consumption a normal power supply can be used. Because of the CE demands on machine safety the DM-05 has been tested for EMC radiation and sensitivity according to the IEC801 norm specification.
Main Technical Specifications
Axis control Analog speed output ± 10V ( ± 10mA)
Encoder interface 5V or 12Vdc/250mA
Single ended or differential
Max. count frequency 100KHz
Max. stroke length 100,000.00 mm
On/Off inputs Opto isolated with common ground
On state 9 - 30Vdc/20mA nom.
On/Off outputs Opto isolated with supply rail
On state 22 - 30Vdc/500mA max.
Analog input 0 - 10V (20KOhm)
Power supply 18 - 30 Vdc
Ripple ± 20% max.
Power dissipation 3.5 Watt max.
Environment
- Operation temp. -5 - +50șC non-condensing
- Storage -10 - +70șC
- EMC According to IEC801
Special functions Crowning control (Wila type)
Crowning control (hydraulic)
AC motor control
Part support
Slaved axis
