|
Product Name: Graphite Plates
Product Description
Graphite plates are manufactured from multiple plys of unidirectional graphite in a cured epoxy matrix. ACP manufactures the following types of graphite plates: (Custom lay-ups available)
.064" FLEX PLATE
The Flex Plate is a Solid/AII Uni Carbon laminate with a black satin finish. Stiffness in all directions is obtained from the 0/90, +/- 45 isotropic lay-up of the unidirectional carbon plys. Flex Plates are ideal for R/C car rear suspension flex plates, retractable landing gear shock absorbing mounts and wing spar joiners.
.074", .084", .094" and .110" SOLID ALL UNI-CARBON
ACP's unique plates are manufactured from only high strength unidirectional carbon fibers with a black satin finish. Stiffness in all directions is obtained from the 0/90, +/- 45 deg.isotropic lay up. The laminate is 100% carbon fiber, with no woven glass filler in the center to add weight. These plates are 30% lighter than fiberglass plates and approximately six times as stiff. The blanks can be used for chassis, shock towers and receiver/servo mounts.
.084", .094" SOLID UNI-WOVEN CARBON
These plates have the same uni-directional carbon fiber isotropic lay-up as the solid all uni-carbon plate. However, to enhance the appearance of the plate, a high gloss woven carbon fabric is added to the surface. The woven outer ply lay-up will not fray or split when cut or counter sunk.
4 Ply and 5 Ply CORLITE Uni-Carbon
CORLITE was developed by ACP to offer the lightest and stiffest carbon plate available . The unique design incorporates hollow ceramic microspheres in an epoxy matrix sandwiched between uni-directional carbon fiber laminates, with a black satin finish. The CORLITE plates are 25% lighter and stiffer than similar panels of the same thickness. The 4 Ply is similar in stiffness to an .084 solid and the 5 Ply is similar in stiffness to a .094" solid. The 5 Ply has an additional layer of uni-directional carbon orientated in the 0 direction. The additional layer can be positioned where the greatest stiffness is required. CORLITE plates are .100" thick.
Company Details
Aerospace Composite Products has been a supplier of composite materials since 1985. We offer a large variety of composite materials specifically developed for lightweight applications. Fiberglass, KevlarŪ and Carbon materials are available in... more
| More Products of this Company: |
Fiberglass Sheets, Laminated Panels, Mats, Spyderfoam, Tubes, UNIDIRECTIONAL, Woven, WOVEN FABRICS |
| Related Products: |
Accessories & Equipment, Adhesive & Sealants, Aircraft Wing, Backwardly Inclined, Carbon Fiber/Fiberglass Plates/Hybrids Plates(Sheets ), CG-72 BEARING MATERIAL, CM-20 BEARING MATERIAL, CN-10 / CN-20 BEARING MATERIAL, CN-852 BEARING MATERIAL, Composite Star, Compression Packings, CS-10 / CS-20 BEARING MATERIAL, CS-30 / CS-40 BEARING MATERIAL, Fiberglass, Fiberglass and aramid fabrics, Fiberglass Handrail system, Fiberglass Sheets, FIBERLAY Products, Fillers, GRP Specialist Sheet, Heat Treating / Vacuum Furnaces of carbon, graphite and composite materials, Laminated Panels, Laminated Plate, LM-40 BEARING MATERIAL, Marine Hardware |
|
|
|
|
