|
Product Name: Solid Top Cooker
Product Description
A set of castings supplied ground and machined to form the hot plate on a
Solid Top Cooker.
Step 1
The set of patterns ready for moulding. Each set consists of two rectangular end
sections, a large round middle section and a small round centre section.
Step 2
The patterns are made to be used on our moulding line. Pre-mixed sand and resin
falls into the moulding frame with the patterns in and sets by a chemical
reaction to form a solid sand mould
Step 3
The two mould halves (a top and a bottom)are placed together, weights added to
the top of the mould to stop the halves seperating during casting and molten
iron poured into the mould.
Step 4
The castings are fettled and then sent for surface grinding to give a smooth,
level working surface. The grinding is carried at Neville Roe Industries Ltd.
Step 5
The set of ground castings are the finish machined at Adminglade Ltd, Sheffield.
This final machining puts locations between each section so that the ground face
is level and flat when the set is assembled.
Step 6
The sets of finished tops are delivered to the customer for fitting onto the
cooker. These sets are made for Moorwood Vulcan ranges built at the Viscount
factory in Sheffield. Both are part of the Enodis group of companies.
Company Details
We are a jobbing foundry which has been established for over 100 years.
We supply a variety of castings in the materials listed below to a wide
range of industrial users, original equipment manufacturers and, more
recently, the... more
| More Products of this Company: |
A fixture casting for a large automotive manufacturer, Energy Efficiency, Floor Grates for a Victorian Glasshouse, Gas reversing Valves, New Railings for Thurnscoe, South Yorkshire, Re-use of Waste Sand, Refurbishment of a Cast Iron Bridge, Refurbishment of a Victorian Fountain in Hull, Replacement Window frames for Dock Development in London, Seats for British Waterways, Spherical Backed Bearings for Power Generation Plant |
|
