|
Product Name: IC PRODUCTS
Product Description
PIC-SERVO SC Motion Control Chip
DIP Part Number: KAE-T0V10-DP
SOIC Part Number: KAE-T0V10-SO
Packages: 28 pin, 0.3" DIP -or- SOIC
Motor Type: DC Servo Motor (brush-type or brushless)
data sheet
Specifications
- Servo controller for DC motors with incremental encoder feedback
- 32 bit position, velocity and acceleration control
- Trapezoidal and velocity profiling permit on-the-fly parameter changes
- 16 bit PID servo gains can be changed on-the-fly
- Multiaxis coordinated motion control support
- High-speed 2 or 3 channel encoder input, limit switch inputs, hall sensor
inputs
- Optional Step and Direction inputs
- Motor current and motor supply voltage sense inputs can be used for
amplifier protection
- PWM, Direction and Enable outputs connect directly to many H-Bridge or
3-Phase amplifiers
- Serial interface can be used with RS232 or RS485 multidrop communications
- Complete documentation and example software available
The PIC-SERVO SC Motion Control Chip is a complete servo motion control system based on the PIC18F2331 microcontroller. It executes all of the real time processes (PID servo filter, motion profiling, commutation, error monitoring, communications) needed for controlling your motor. The simple serial NMC communications protocol lets you easily connect your microcontroller or PC host computer to multiple controller chips. (The address space supports up to 254 controllers.) The coordinated motion control support allows your host computer to precisely coordinate the motion of up to 16 motors. The same Windows test utilities and libraries used with our motion control boards can be used with your own custom boards designed with the PIC-SERVO SC.
PIC-STEP Motion Control Chip
DIP Part Number: KAE-T3V1-DP
SOIC Part Number: KAE-T3V1-SO
Packages: 28 pin, 0.3" DIP -or- SOIC
Motor Type: Stepper
data sheet
Specifications
- High speed indexer for stepper motor control systems
- Speeds up to 50,000 steps per second are suitable for microstepping
- Trapezoidal and velocity profiling modes with 32 bit position register
- Independent, software controllable running and holding current settings
- Analog input for motor temperature sensing
- Limit switch inputs, e-stop input, plus auxiliary inputs and outputs
- Step and Direction outputs connect to many common drivers
- Serial interface can be used with RS232 or RS485 multidrop communications
- Complete documentation and example software available
The PIC-STEP Motion Control Chip is a high-speed stepper motor indexer based on the PIC16C73 which provides trapezoidal position and velocity profiling control. The NMC serial communications protocol connects your host computer and the Step and Direction outputs connect to many standard stepper motor drivers. Fully compatible with the PIC-SERVO SC controller chip above, you can easily put together systems controlling a combination of stepper and servo motors. The same Windows test utilities and libraries used with our motion control boards can be used with your own custom boards designed with the
PIC-STEP.
PIC-I/O General Purpose I/O Chip
DIP Part Number: KAE-T2V1-DP
SOIC Part Number: KAE-T2V1-SO
Packages: 28 pin, 0.3" DIP -or- SOIC
data sheet
Specifications
- General Purpose I/O controller chip
- 12 digital I/O pins programmable as inputs or outputs
- Three 8-bit analog inputs
- Two PWM output channels with high current (5 amp) drivers
- One counter/timer channel
- Serial interface can be used with RS232 or RS485 multidrop communications
- Complete documentation and example software available
The PIC-I/O General Purpose I/O Chip compliments our other motion control chips, allowing you to add additional I/O capabilities to your motion control systems. It uses the same NMC serial communications protocol as our other controllers making it simple to add analog or digital I/O as needed.
Motion Basic Controller Chip
Part Number: KAE-MBV1-DP
Package: 28 pin, 0.3" DIP
data sheet
Specifications
- Master controller for creating stand-alone motion control systems
- Plugs into socket on the SSA-485
adapter board
- Create simple Motion Basic
programs using our Windows based programming utility
- Easy-to use BASIC programming language
- Controller chip also provides a simplified ASCII Command Interface (ACI)
mode
The Motion Basic controller chip is a microcontroller which allows you to create simple stand-alone motion control programs for up to 8 of our NMC motion control modules. Using our easy-to-use Windows based programming and debugging utility you can quickly create BASIC language programs which include motion commands. Motion Basic programs can also communicate with another computer over an RS232 or USB port. The Motion Basic controller chip is designed for use with our SSA-485 board to allow non-programmers to create simple motion control applications.
The Motion Basic controller chip also includes a simplified ASCII Command Interface (ACI) mode for communicating directly with our NMC motion controllers. When operating in ACI mode, you can send simple ASCII commands ( e.g.: "1 svmp 5000") to the controllers using an RS232 terminal or a terminal program. While not as efficient or powerful as the native binary NMC communications protocol, ACI mode commands can be much simpler to use for non-demanding
applicaitions.
Company Details
PIC-SERVO offer motion control boards with integrated power amplifiers for DC servo motors, brushless servo motors and stepper motors, as well as controller chips for your own custom boards. Easily connected to standard serial ports, you can... more
|
