|
Product Name: CONTROLLER BOARDS
Product Description
PIC-SERVO SC Motion Control Board
Part Number: KAE-T0V10-BDV1
Motor Type: DC Servo Motor (brush-type)
Driver Ratings: 3A cont./6A peak, 12-48vdc
Controller chip: PIC-SERVO SC
board data sheet
controller chip data sheet
Specifications
- 32 bit position, velocity and acceleration control
- Trapezoidal and velocity profiling permit on-the-fly parameter changes
- 16 bit PID servo gains can be changed on-the-fly
- Multiaxis coordinated motion control support
- 2 or 3 channel encoder input, limit switch inputs, hall sensor inputs
- Optional Step and Direction inputs
- Amplifier includes overcurrent, overvoltage, undervoltage and thermal
overload protection
- May also be used with external amplifiers
- 4-wire RS485 communications interface can be connect to additional
controllers (up to 32 total)
- Complete documentation and example software available
- Nominal size: 2" x 3"
The PIC-SERVO SC Motion Control Board is maybe the fastest and lowest-cost way of getting your DC servo motor up and running. The clear, explicit documentation and the Windows test utility program take the mystery out of servo motor control. The board is designed for easily adding additional axes of control without flipping dip switches or setting jumpers. By mounting these compact, modular boards near your motors, you can greatly simplify the rat's nest of wiring which plagues most multi-axis control systems. The PIC-SERVO SC Motion Control Board also includes motor power monitoring, soft current limiting, and position error limiting which eliminate the need for an additional real-time processor. If used with the Z232-485 Serial Adapter or with a Step & Direction signal generator, a set of PIC-SERVO SC Motion Controllers can even be operated as a stand-alone control system. All this comes at a price comparable to stepper motor controllers.
PIC-SERVO SC 3PH Motion Control Board
Part Number: KAE-T0V10-BD3PHV1
Motor Type: Brushless or Brush-type DC Servo Motor
Driver Ratings: 6A cont./7A peak, 12-48vdc
Controller chip: PIC-SERVO SC
board data sheet
controller chip data sheet
Specifications
- 32 bit position, velocity and acceleration control
- Trapezoidal and velocity profiling permit on-the-fly parameter changes
- 16 bit PID servo gains can be changed on-the-fly
- Multiaxis coordinated motion control support
- 2 or 3 channel encoder input, limit switch inputs
- Optional Step and Direction inputs
- May be used with DC brushless or brush-type motors
- Amplifier includes overcurrent, overvoltage, undervoltage and thermal
overload protection
- 4-wire RS485 communications interface can be connect to additional
controllers (up to 32 total)
- Complete documentation and example software available
- Nominal size: 3" x 3"
The PIC-SERVO SC 3PH Motion Control Board is similar to the standard PIC-SERVO SC board above but with a higher current amplifier capable of driving brushless or brush-type DC motors. This high-performance, low-cost controller is less than half the cost of similar brushless motor controllers. It uses the exact same controller chip as the standard PIC-SERVO SC board and integrates seamlessly with our other controllers.
PIC-STEP Motion Control Board
Part Number: KAE-T3V1-BDV1
Motor Type: 2-Phase Stepper (4, 6 or 8 wire)
Driver Ratings: 2A per phase, 7.5-46vdc
Controller chip: PIC-STEP
board data sheet
controller chip data sheet
Specifications
- Thermally protected bipolar chopper driver with full and half step modes
- Speeds up to 50,000 steps per second
- Trapezoidal and velocity profiling modes with 32 bit position register
- Independent, software controllable running and holding current settings
- Analog input for motor temperature sensing
- Limit switch inputs, e-stop input, plus auxiliary inputs and outputs
- May be used with external microstepping drivers
- 4-wire RS485 communications interface can be connect to additional
controllers (up to 32 total)
- Complete documentation and example software available
- Nominal size: 2" x 3"
The PIC-STEP Motion Control Board is an integrated controller which includes both high-speed indexer functions and a power driver. It integrates seamlessly with our servo controller boards to allow you to easily control systems with both servo motors and steppers. The PIC-STEP Motion Control Board is supported by the same Windows test programs and software libraries used for our servo controllers.
PIC-I/O General Purpose I/O Controller
Part Number: KAE-T2V1-BDV1
Controller Type: Digital & Analog I/O
Controller chip: PIC-I/O
board data sheet
controller chip data sheet
Specifications
- 12 digital I/O pins programmable as inputs or outputs
- Three 8-bit analog inputs
- Two PWM output channels with high current (5 amp) drivers
- One counter/timer channel
- Prototyping area for adding components
- 4-wire RS485 communications interface can be connect to additional
controllers (up to 32 total)
- Complete documentation and example software available
- Nominal size: 2" x 3"
The PIC-I/O General Purpose I/O Controller allow you to add additional general purpose I/O capabilities to your motion control system. With a combination of our motion control boards and PIC-I/O controllers you can create complete machine control systems with no additional hardware. The PIC-I/O General Purpose I/O Controller is supported by the same Windows test programs and software libraries used for our servo controllers.
SSA-485 Smart Serial Adapter
Part Number: KAE-SSA485-BDV2
Controller Type: Serial Adapter + Standalone Host
Controller chip: Motion Basic or PIC18Fxxxx
data sheet
Specifications
- Four basic operating modes:
- RS232 or USB to RS485 pass-thru adapter
- Motion
Basic programmable host controller
- ASCII Command Interface (ACI) Mode
- C programmable host controller using a
PIC18xxxx processor
- In pass-thru adapter mode:
- RS232 (DB9-F) or USB (type B) connection to host
- Host signals translate directly to full-duplex
(4-wire) RS485
- For direct communications using our motion
controllers' native NMC protocol
- RS485 connector directly compatible with all of
our controller boards
- In Motion Basic
host controller mode:
- 28 pin socket for our Motion Basic controller chip (purchased separately)
- Create and download BASIC motion control programs
into EEPROM
- Downloaded programs run automatically on power-up
- Simple Windows programming utility used for
creating and debugging programs
- 28 pin socket for our Motion Basic controller chip (purchased separately):
- Motion controller boards can be operated by
sending simple ASCII command strings
- Compatible with standard terminal programs like
Hyperterminal
- In C programmable host controller mode:
- 28 pin socket for a Microchip PIC18Fxxxx
microcontroller
- Connects directly to Microchip's ICD2 development
module
- Use MPLAB, Microchip's free development software
- Provides additional digital and analog I/O
on-board
- In stand-alone controller modes, the RS232 or USB port is available for
communicating with external computers.
- Complete documentation and example software available
- Nominal size: 2" x 3"
- Note: Version 2 of this board is functionally identical to Version 1,
except v.2 will autoselect between USB and RS232 - no jumper selection is
necessary.
The SSA-485 Smart Serial Adapter allow you to connect up to 32 of our NMC motion controllers to you host's (PC, etc.) RS232 or USB port - or - you can use it as a stand-alone host contoroller for up to 32 of our NMC modules. As a simple adapter, serial data from your host is translated directly to RS485. In this mode, you can use our Windows test utility programs or your own programs to send commands directly to the motion control boards.
By adding a microprocessor chip to the on-board 28-pin socket, the SSA-485 itself becomes the host controller. Our Motion Basic controller chip is a pre-programmed microcontroller which executes BASIC programs you create with our Windows based programming and debugging utility. Creating, downloading and debugging simple motion control programs requires no formal programming knowledge.
You may also plug a PIC18Fxxxx series microprocessor into the on-board 28-pin socket. Using Microchip's inexpensive ICD2 development tools, you can create powerful C or assembly language programs to handle complex applications.
Accessories
NMC Communications Cables p/n KAE-CC20-AC (20") or KAE-CC80-AC (80")
These 10 wire, twisted pair flat-ribbon cables are used for interconnecting our controller boards to each other and to the SSA-485 adapter. They carry both the RS485 data and logic power and GND. Available in 20" and 80" lengths.
RS232 Cable p/n KAE-RS232-AC
This DB9/male - DB9/female straight cable connects standard PC COM ports to the SSA-485 adapter. 72" Length.
USB Cable p/n KAE-USB-AC
This USB A-B cable connects standard USB ports to the SSA-485 adapter. 72" Length.
Logic Power Supply p/n KAE-LPS-AC
This "wall-wart" style power supply is 9vdc unregulated with a rated current of 500 ma. It can supply power to approximately 5 of our controller boards.
Company Details
PIC-SERVO offer motion control boards with integrated power amplifiers for DC servo motors, brushless servo motors and stepper motors, as well as controller chips for your own custom boards. Easily connected to standard serial ports, you can... more
|
