|
Product Name: AMP/TSCA - Model 2015A
Product Description
The CANBERRA Model 2015A combines, in one single width module, a spectroscopy amplifier with gated baseline restoration and a timing single channel pulse height analyzer.
The 2015A amplifier employs a simple gated baseline restorer which, because of its symmetrical characteristic, provides high resolution for HPGe detectors at low and high counting rates.
Although it is a high performance instrument, the Model 2015A is also very versatile. It has all the characteristics necessary to make it useful with scintillation detectors, gas proportional counters, and silicon detectors. High gain, low noise, selectable time constants, and count rate optimization are several of the more important features designed into the amplifier of the Model 2015A.
The utility of the Model 2015A derives from the dual function of its pulse height analyzer circuitry. In the SCA mode of operation, a logic signal output is generated whenever the amplifier unipolar signal falls between the energy levels determined by the front panel controls (E and DE). This mode is especially useful when a wide dynamic range is required.
In the Timing (TSCA) mode the same logic signal is generated, but it is referenced in time relative to the leading edge of the preamp signal. This provides a signal that is useful in applications requiring time coincidence.
In addition to the SCA OUTPUT, the Model 2015A also provides a multifunction capability which can be programmed internally to provide a lower level (E) Discriminator Output, or an upper level DISCriminator (E + DE) Output or to provide an external input level for remote control of the lower level discriminator.
Precise repeatable performance is designed and built into the 2015A. The front panel variable controls of the Model 2015A are precision ten-turn potentiometers. The precision of the DE window setting can be further enhanced by use of rear panel sensitivity selector switch (DE Range). A front panel LED indicator is provided to assist in set up and troubleshooting. The LED is activated from the lower level discriminator and is useful for setting the discriminator just above the noise.
Features
Spectroscopy grade amplifier with high count rate restoration
Timing single channel analyzer with:
SCA and LLD or ULD outputs
LLD threshold indicator for easy set-up
Preamp leading edge timing
Designed for use with proportional counters, NaI(Tl), Ge, and Si detectors
Company Details
For over 35 years, the name Canberra has been known for world
class nuclear measurement equipment and
services. Now... meet the new
Canberra.
... more
| More Products of this Company: |
ACHNP97 & ACHNA98 Industrial Charge Amplifiers for Helium-3 Detectors, ADM606M Multi-purpose Radiation Monitor, AFT Research Amplifier - Model 2025, Alpha Analyst Integrated Alpha Spectrometer, Alpha Beta Environmental Continuous Air Monitor (ECAM), Alpha Sentry CAM, Alpha Spectrometers and Accessories, Arrangement of 2 or more Germanium Detectors, BARA 31 Gamma Alarm Beacon, Bin/Power Supply - Model 2000/2100, CAM110FF Series Continuous Air Monitors, Charge Amplifiers for Bonner Multisphere Systems, Charge Amplifiers for Neutron Scattering, Digital Signal Processor - Model 2060, Eclipse - Control and Analysis Software for S5XLB and LB5500 Systems, Edge/Crossover Timing Single Channel Analyzer - Model 2037A, Front Opening Split-Top Shield - Model 767, G64 Gamma Monitor, Gamma Analyst Integrated Gamma Spectromete, Ge Clover Detectors, Ge Encapsulated Detectors, Ge Segmented Coaxial Detectors, Geiger Mueller Detectors - GP Series, Geiger-Mueller (GM) Tubes, iCAM Alpha/Beta Air Monito, ICB Programmable Digital Signal Processor - Model 9660, iMatic Gas-less Automatic Alpha/Beta Counting System, iSolo Gas-less Manual Alpha / Beta Counting System, LB4100 Multi-Detector Low Background Alpha/Beta Counting System, LB5500 Large Area Automatic Low Background Alpha/Beta Counting System, Linear Ratemeter - Model 2081, Model 512 - Dual Counter/Timer, Model 8224 Analog Multiplexer, Model 8715 - Analog-to-Digital Converte, Model 9635 - ICB Programmable ADC, Model Calibrator/M Semi-Automatic Calibration and Check Bench, Networked Continuous Air Monitor (NetCam), Neutron Detectors - NP Series, PGM102 Portable Gas Monitor, Photomultiplier Tube Base/Preamplifier - Model 2007/2007P, Scintillation Detectors - Model 802, Series 5 APC Console Based Automatic Alpha/Beta/Gamma Counting Systems, Series 5E Console-Based Automatic Low Background Alpha/Beta Counting System, Series 5XLB Automatic Low Background Alpha/Beta Counting System, Si(Li) Charged Particle Detectors with Transmission Mounts, Si(Li) Segmented X-ray Detectors, Silicon (Li) Detector Systems, Spectroscopy Amplifier - Model 2026, Standard PIPS Detectors, TAM Series Tritium Air Monitor, X-PIPS Detector |
| Related Products: |
265A Photomultiplier Base, 296 ScintiPack Photomultiplier Base with Preamp and HV Supply, 414A Fast Coincidence, 427A Delay Amplifier, 439 Digital Current Integrator, 460 Delay Line Amplifier, 474 Timing Amplifier, 533 DUAL SUM AND INVERT AMPLIFIER, 542 Linear Gate and Stretcher, 570 AMPLIFIER, 572A AMPLIFIER, 590A AMPLIFIER AND TIMING SINGLE CHANNEL ANALYZER, 671 SPECTROSCOPY AMPLIFIER, 673 Spectroscopy Amplifier and Gated Integrato, 863 QUAD TIMING FILTER AMPLIFIER, 9302 AMPLIFIER DISCRIMINATOR, 9327 1-GHz Amplifier and Timing Discriminator, ADM606M Multi-purpose Radiation Monitor, AFT Research Amplifier - Model 2025, Alpha Analyst Integrated Alpha Spectrometer, Alpha Sentry CAM, Alpha Spectrometers and Accessories, Bin/Power Supply - Model 2000/2100, Chemical Weapons Assay, CO4020 Quad 4-Input Logic Unit |
|
|
|
|
