|
Product Name: Ge Segmented Coaxial Detectors
Product Description
For gamma tracking, polarimetry, Doppler effect correction, b decay suppression
Longitudinal and transversal segmentation of the outer contact by photolithography (up to 36 segments), on all N type crystal geometries
Neither dead zone nor absorbing material between segments
Monolithic detectors
No crosstalk effects
Increase of granularity of multidetector systems
Localisation of the interaction and gamma ray tracking capability through coincidence between internal and segment contacts.
Description
Segentation Techniques
Already available on planar detectors, the segmentation provides high quality information signals coming from each detector cell, while taking benefits from the total detection volume.
The segmented coaxial Germanium offer, in addition to the characteristics of coaxial detectors (High efficiency and excellent resolution), the potential due to a good granularity.
Granularity of segmented coaxial detectors qualifies the number of independent cells constituting this detector. Longitudinal and transversal crystal segmentation in 2 or 4 drastically increases the granularity (up to 36 output channels are possible).
Such detectors allow an important reduction of gamma ray broadening due to the Doppler effect.
Moreover, the use of internal and external contacts of the crystal (in case of detector segmentation) gives us an interaction position information:
- Vertically and transversally by analyzing signals induced by mirror charges
- Radially, by making a pulse shape analysis
Accurate location of the interaction points allows not only reduction of the Doppler broadening, but also gamma ray tracking.
The external contact of a detector can be longitudinally or transversally segmented without dead zone generation. All segmentations are possible, on the front face (like a checker-board for example) and laterally (in one or two directions).
For a given n-segment detector, n+1 preamplifiers are used : one for each external segment plus one for the central contact. This design allows a better use of the full detection volume by AC coupling.
Segment separation is such that no cross-talk effect occurs between consecutive channels. Under particular conditions, inner contact segmentation makes it possible to decrease the number of output channels. An externally segmented crystal, 6-fold longitudinally and 2-fold transversally, will offer 2 x 6 = 12 output channels, whereas a 6-fold crystal externally segmented (longitudinally) and 2-fold segmented internally (transversally) will have 6 + 2 = 8 output channels.
Company Details
For over 35 years, the name Canberra has been known for world
class nuclear measurement equipment and
services. Now... meet the new
Canberra.
... more
| More Products of this Company: |
ACHNP97 & ACHNA98 Industrial Charge Amplifiers for Helium-3 Detectors, ADM606M Multi-purpose Radiation Monitor, AFT Research Amplifier - Model 2025, Alpha Analyst Integrated Alpha Spectrometer, Alpha Beta Environmental Continuous Air Monitor (ECAM), Alpha Sentry CAM, Alpha Spectrometers and Accessories, AMP/TSCA - Model 2015A, Arrangement of 2 or more Germanium Detectors, BARA 31 Gamma Alarm Beacon, Bin/Power Supply - Model 2000/2100, CAM110FF Series Continuous Air Monitors, Charge Amplifiers for Bonner Multisphere Systems, Charge Amplifiers for Neutron Scattering, Digital Signal Processor - Model 2060, Eclipse - Control and Analysis Software for S5XLB and LB5500 Systems, Edge/Crossover Timing Single Channel Analyzer - Model 2037A, Front Opening Split-Top Shield - Model 767, G64 Gamma Monitor, Gamma Analyst Integrated Gamma Spectromete, Ge Clover Detectors, Ge Encapsulated Detectors, Geiger Mueller Detectors - GP Series, Geiger-Mueller (GM) Tubes, iCAM Alpha/Beta Air Monito, ICB Programmable Digital Signal Processor - Model 9660, iMatic Gas-less Automatic Alpha/Beta Counting System, iSolo Gas-less Manual Alpha / Beta Counting System, LB4100 Multi-Detector Low Background Alpha/Beta Counting System, LB5500 Large Area Automatic Low Background Alpha/Beta Counting System, Linear Ratemeter - Model 2081, Model 512 - Dual Counter/Timer, Model 8224 Analog Multiplexer, Model 8715 - Analog-to-Digital Converte, Model 9635 - ICB Programmable ADC, Model Calibrator/M Semi-Automatic Calibration and Check Bench, Networked Continuous Air Monitor (NetCam), Neutron Detectors - NP Series, PGM102 Portable Gas Monitor, Photomultiplier Tube Base/Preamplifier - Model 2007/2007P, Scintillation Detectors - Model 802, Series 5 APC Console Based Automatic Alpha/Beta/Gamma Counting Systems, Series 5E Console-Based Automatic Low Background Alpha/Beta Counting System, Series 5XLB Automatic Low Background Alpha/Beta Counting System, Si(Li) Charged Particle Detectors with Transmission Mounts, Si(Li) Segmented X-ray Detectors, Silicon (Li) Detector Systems, Spectroscopy Amplifier - Model 2026, Standard PIPS Detectors, TAM Series Tritium Air Monitor, X-PIPS Detector |
| Related Products: |
265A Photomultiplier Base, 296 ScintiPack Photomultiplier Base with Preamp and HV Supply, 460 Delay Line Amplifier, 474 Timing Amplifier, 570 AMPLIFIER, 572A AMPLIFIER, 590A AMPLIFIER AND TIMING SINGLE CHANNEL ANALYZER, 671 SPECTROSCOPY AMPLIFIER, 673 Spectroscopy Amplifier and Gated Integrato, 863 QUAD TIMING FILTER AMPLIFIER, 9327 1-GHz Amplifier and Timing Discriminator, ACHNP97 & ACHNA98 Industrial Charge Amplifiers for Helium-3 Detectors, ADM606M Multi-purpose Radiation Monitor, AFT Research Amplifier - Model 2025, ALPHA (NORM) CONTAMINATION IN PIPES, TOOLS AND OBJECTS, Alpha Analyst Integrated Alpha Spectrometer, Alpha Beta Environmental Continuous Air Monitor (ECAM), Alpha Sentry CAM, Alpha Spectrometers and Accessories, ALPHA SURFACE CONTAMINATION, AMP/TSCA - Model 2015A, Arrangement of 2 or more Germanium Detectors, BARA 31 Gamma Alarm Beacon, Bin/Power Supply - Model 2000/2100, CAM110FF Series Continuous Air Monitors |
|
|
|
|
