|
Product Name: Turbo PMAC2 VME - 32 Axis Stepper and/or Direct PWM Controller with VME bus interface
Product Description
The Turbo PMAC2-VME offers high performance capabilities to the robust and highly expandable VME bus format. Providing up to 32-axis of control in Digital Direct PWM output.
Hardware Features
80 MHz DSP56303 CPU (120 MHz PMAC equivalent) (fast
internal memory for 1st 15 axes servo & commutation)
128k x 24 SRAM compiled/assembled program memory (5C0)
(for firmware, compiled PLCs, user-written servo & phase)
128k x 24 SRAM user data memory (5C0) (for motion & uncompiled PLC progs, variables, tables, buffers)
1M x 8 flash memory for user backup & firmware (5C0)
Latest released firmware version
RS-232/422 serial interface, VME bus interface
4 channels axis interface circuitry, each including:
- 3 output command signal sets, configurable as either:
- 2 serial data streams to external DACs, 1 pulse-&-direction
- 3 PWM top-and-bottom pairs
- 3-channel A, B, C, Quad per Axis differential/single-ended encoder input
- 9 input flags, 2 output flags
- Interface to 2 external serial ADCs, 8 to 18 bits
2 channels supplemental interface circuitry, each including:
- 2-channel differential/single-ended encoder input
- 1 output command signal set, configurable as pulse-&-direction or PWM top-and-bottom pair
Display, MACRO, muxed I/O, direct I/O interface ports.
PID/notch/feedforward servo algorithms
Extended "pole-placement" servo algorithms
1-year warranty from date of shipment
Software Features
Trajectory Generation Features
- Linear interpolation mode with S-curve accel/decel
- Circular interpolation mode with S-curve accel/decel
- Rapid point-to-point move mode
- Cubic B-spline interpolation mode
- Cubic Hermite-spline (PVT) interpolation mode
- Automatic move-until-trigger functions with hardware capture
- Altered destination on the fly
- Interactive jog moves
- Multi-move lookahead for velocity and acceleration limiting
Servo Features
- Standard digital PID feedback filter
- Velocity, acceleration, and friction feedforward
- 2nd-order notch/low-pass filter
- Gains changeable at any time
- Programmable input, integrator, and output limits
- Alternate 35-term “pole-placement” servo filter
- Alternate user-written high-level “Open Servo” algorithms
Commutation Features
- Sinusoidal commutation of AC servo motors
- Vector control of AC induction motors
- Digital current-loop closure with direct PWM output (PMAC2)
Compensation Features
- Position compensation tables (1D & 2D)
- Torque compensation tables
- Backlash compensation
- Tool radius compensation
Safety Features
- Hardware and software overtravel limits
- Amplifier enable/fault handshaking
- Following error limits
- Integrated current limit
- Encoder loss detection (some versions)
- Watchdog timer
- Program and communications checksums
Computational Features
- Real-time multi-tasking operating system
- 48-bit floating-point math for user programs
- Trigonometric and transcendental functions
- Automatic type-matching of different variable types
- User-defined pointer variables to any registers
Feedback sensor types that can be processed
- Digital quadrature encoders
- Sinusoidal encoders, interferometers
- Resolvers
- Potentiometers
- LVDTs, RVDTs
- Parallel-format encoders, interferometers
- MLDTs
- Serial absolute encoders (e.g. SSI)
Coordination and Master/Slave Features
- User-defined coordinate systems for automatic coordination of axes
- Separate coordinate systems for independent motion of axes
- Multi-motor axis support (e.g. gantries)
- Dynamic axis transformations (e.g. offsets, rotations, mirroring)
- User-written forward and inverse-kinematic algorithms for non-Cartesian geometries
- Electronic gearing (no programming required)
- Electronic cams with programmable profiles
Motion Program Features
- High-level programming language
- Automatic sequenced execution of moves
- Calculations and I/O synchronous to motion
- Axes programmed in user engineering units
- Motion values as constants or expressions
- Automatic coordination of multiple axes
- Ability to execute G-code programs
PLC Program Features
- Execution asynchronous to programmed motion
- I/O control as in hardware PLC
- Executive functions for standalone applications
- Safety and status monitoring
- Servo gain scheduling
- Data reporting functions
- Access to all registers in controller
| Related Products: |
"HIGH PERFORMANCE GAS DRIVE" K-18, "HIGH PERFORMANCE GAS DRIVE" K-18 G, "HIGH PERFORMANCE GAS DRIVE" K-30G, "HIGH PERFORMANCE GAS DRIVE" K-50 G, "HIGH PERFORMANCE GAS DRIVE" K-70, "The Ultimate Performance Rotary Screw Air Compressor" HERCULES 125, 150 & 200 Horsepower Models, "The Ultimate Performance Rotary Screw Air Compressor" HERCULES 15, 20, 25, 30 & 40 Horsepower Models, "The Ultimate Performance Rotary Screw Air Compressor" HERCULES 40, 50 & 60 Horsepower Models, "The Ultimate Performance Rotary Screw Air Compressor" HERCULES 75 & 100 Horsepower Models, (PoE) Power over Ethernet Switches, .965in Male - 1.25in Female Adapter, 1 GPM Electrocoagulation System, 1-amp battery charge controller supports universal Li-ion designs, 1.25in Dropin Extension Tube with 1in Eye Piece Push Back, 1.25in Male - 2in Female Adapter, 1.25in Threadin Extension Tube with 1in Eye Piece Push Back, 1/3 & 3/4 HP Fixed Speed, Variable Length Turbines, 102 Series Triliptical Stackable Status Indicator, 12mm Small DC Motors, 15-80V 25A Multitek Servo Controller, 16 Megapixel Camera With CameraLink Output, 16 Megapixel Camera With CameraLink Output, 16-bit PC card/CF+ bridge to serial and USB host port OXCFU950, 16-bit PC card/CF+ bridge to serial port OXCF950, 1900MS12-24 LED Wall Clock |
|
