|
Product Name: E-650
Product Description
E-650.00 is a bench-top piezo driver, especially designed for low-voltage, multilayer PZT bender actuators (bimorphs) such as the PL122 to PL140. It is equipped with a special circuit that can provide one fixed voltage and a variable voltage in the range of 0 to 60 V (±30 V). The driver can output and sink a peak current of 300 mA. The E-650.00 can be operated in two ways:
I. Manual Control:
Output voltage can be set by a 10-turn DC-offset potentiometer* in E-650.OE in the range of 0 to 60 V.
II. External Control:
Output voltage is controlled by an analog signal applied to the BNC input, ranging from 0 to 10 V. Multiplying by the gain factor of 6, an output voltage range of 0 to 60 V results. The DC-offset
potentiometer* can be used to bias the control input voltage.
A 3˝-digit LCD display shows the output voltage.
The E-650.OE is the OEM version of the E-650.00. It provides peak output power of 8 W. All inputs and outputs are via 8 header pins located on the bottom of the module. The E-650.OE is designed to be mounted on a circuit board. The electronics are fully enclosed in a metal case.
* not included in E-650.OE
Company Details
Where nanopositioning technology and motion control systems of the highest accuracy level are concerned, PI has been a leading supplier worldwide for many years.
Over 30 Years Experience
When PI introduced piezoelectric... more
| More Products of this Company: |
Display Modules for Modular Piezo Controllers E-515, E-481, E-610 (LVPZT piezo amplifier / servo-controller module, OEM), E-621, E-625, E-651 – E-614, E-660, E-663, E-664, E-665, E-710, E-750, E-755, E-760, E-761, E-831 · E-841 · E-842, High-Power, Modular HVPZT Piezo Amplifiers / Controllers E-470 – E-471 – E-472 – E-420, HVPZT amplifier module E-507, HVPZT Piezo Amplifier, 3 Channels E-463, HVPZT Piezo Drivers E-461, Interface module with D/A converter & LCD display for E-516, LVPZT controller card with parallel interface E-612 · E-661, LVPZT Piezo Amplifier Module E-505, LVPZT Piezo Amplifier Module, 3 Channels E-503, Modular Piezo Control Systems (HVPZT & LVPZT) E-500 – E-501, PicoCube® Piezo Controller E-536, Power supply for E-530, Power supply for E-531, Sensor & Position Servo-Control Modules for Piezo-Driven Nanopositioning Systems E-509 |
|
|
|
|
