|
Product Name: E-660
Product Description
The E-660.00 piezo driver is a low-cost amplifier for low-voltage PZTs. It can output and sink a peak current of 20 mA and an average current of 10 mA. The E-660 is designed for static and low-level dynamic PZT applications. Because an operating current of only 150 mA @ 12 V is required, battery operation is possible.
E-660.OE is the OEM version of the E-660.00 amplifier. The OEM module does not provide manual controls. All inputs and outputs are via 8 header pins located on the bottom of the
E-660.OE. The module is designed to be mounted on circuit boards. The electronics are fully enclosed in a metal case. The E-660.00 and E-660.OE can be operated in two ways:
I. Manual Control:
Output voltage can be set by a DC-offset potentiometer (not supplied with E-660.OE) in the range of 5 to 100 V.
II. External Control:
Output voltage is controlled by an analog signal in the range of 0 to 10 V, applied to the BNC input (E-660.00). Multiplying by the gain factor of 10, an output voltage range of +5 to +100 V results. The DC-offset potentiometer adds a DC bias to the input, allowing continuous shifting of the input voltage range between 0 V to +10 V and -10 V to 0 V.
Company Details
Where nanopositioning technology and motion control systems of the highest accuracy level are concerned, PI has been a leading supplier worldwide for many years.
Over 30 Years Experience
When PI introduced piezoelectric... more
| More Products of this Company: |
Display Modules for Modular Piezo Controllers E-515, E-481, E-610 (LVPZT piezo amplifier / servo-controller module, OEM), E-621, E-625, E-650, E-651 – E-614, E-663, E-664, E-665, E-710, E-750, E-755, E-760, E-761, E-831 ˇ E-841 ˇ E-842, High-Power, Modular HVPZT Piezo Amplifiers / Controllers E-470 – E-471 – E-472 – E-420, HVPZT amplifier module E-507, HVPZT Piezo Amplifier, 3 Channels E-463, HVPZT Piezo Drivers E-461, Interface module with D/A converter & LCD display for E-516, LVPZT controller card with parallel interface E-612 ˇ E-661, LVPZT Piezo Amplifier Module E-505, LVPZT Piezo Amplifier Module, 3 Channels E-503, Modular Piezo Control Systems (HVPZT & LVPZT) E-500 – E-501, PicoCubeŽ Piezo Controller E-536, Power supply for E-530, Power supply for E-531, Sensor & Position Servo-Control Modules for Piezo-Driven Nanopositioning Systems E-509 |
|
|
|
|
