|
Product Name: Motherboard Tests
Product Description
Micron Server Test
View
recorded test results
Two motherboards are used to perform the qualification tests; the minimum
load is run in a system equipped with a single CPU while the maximum load is run
in a system equipped with dual processors. Both systems use the latest BIOS
revision.
- Tests performed use both the minimum and maximum memory configurations
supported by the motherboard.
- The testing of each motherboard uses 8 hours of power cycling in both a
Windows and DOS operating system.
- Verification of memory configuration, size, and type ensures that the
system has detected the memory properly.
- The testing of each motherboard uses one complete loop using comprehensive
memory diagnostics at ambient temperature and nominal voltage.
The testing of each motherboard uses comprehensive memory diagnostics at the
following temperature and voltage conditions:
1.
High Temperature
Low Voltage
|
2.
High Temperature
High Voltage
|
3.
Low Temperature
Low Voltage
|
4.
Low Temperature
High Voltage
|
View
recorded test results
Full qualification testing uses the fastest CPU supported by the motherboard
as well as the latest BIOS revision.
- Tests performed use both the minimum and maximum memory configurations
supported by the motherboard.
- The measurement of signal quality may occur on critical signals to ensure
the memory module meets data sheet specifications.
- The duration of the memory diagnostic testing is 12 hours for each corner.
Total test time per board is 48 hours.
- Verification of memory configuration, size, and type ensures the system
has detected the memory properly.
The testing of each motherboard uses comprehensive memory diagnostics at the
following temperature and voltage conditions:
1.
High Temperature
Low Voltage
|
2.
High Temperature
High Voltage
|
3.
Low Temperature
Low Voltage
|
4.
Low Temperature
High Voltage
|
View
recorded test results
Initial evaluation consists of multiple boot-up testing into two different
operating systems, as well as a minimum of 4 hours of comprehensive memory
diagnostic testing. The qualification test uses the fastest CPU supported by the
motherboard as well as the latest BIOS revision.
- Tests performed use both the minimum and maximum memory configurations
supported by the motherboard.
- The testing of each motherboard for one complete loop uses comprehensive
memory diagnostics at ambient temperature and nominal voltage conditions.
- The testing of each motherboard uses typical and graphics-intensive
applications in at least one O/S environment for a minimum of 24 hours to
ensure system compatibility with memory.
- Verification of memory configuration, size, and type ensures the system
has detected the memory properly.
Micron's test conditions, used to qualify Micron memory products, meet or
exceed Intel's Full and Basic Functional Test Procedures as defined at Intel's
"Desktop Board Component Functional Testing Levels" Web page, http://developer.intel.com/design/motherbd/genqual.htm.
Contact your Micron Sales
Representative for additional details.
Company Details
Follow Micron's progression since its inception in 1978 to becoming one of
the world's leading providers of advanced semiconductor solutions. Through its
worldwide operations, Micron manufactures and markets DRAM, Flash memory, CMOS
image... more
| More Products of this Company: |
1.3 Megapixel, 2 Megapixel, 3.1 Megapixel, 5 Megapixel, 8 Megapixel, Burst A/D MUX PSRAM, CellularRAM, CMOS Imaging Technical and Customer Service Notes, CMOS Lens Selection and Suppliers, DDR SDRAM, DDR2 SDRAM, DDR3 SDRAM, FBDIMM, High Speed, Managed NAND, MCP Webinar, MiniDIMM, Mobile DDR SDRAM, Mobile SDRAM, NAND Flash Applications, NAND Flash Software, NAND Flash Technical Notes, PSRAM Technical Notes, RDIMM, RLDRAMŪ Memory, SDRAM, SODIMM, UDIMM, VGA, VLP DIMM, VLP MiniDIMM |
| Related Products: |
Alcatel-Lucent 9400 UX Digital Microwave Radio Links, Alcatel-Lucent 9600 USY SDH Urban Digital Radio Links, UDIMM |
|
