Everything Engineering
Login:   Password:
Not Register?    Sign Up NOW!
Date: 13 October 2008
Google
 
SIM Relay Card  
Search Country   Reset filter

SIM Relay Card

Product Name: SIM Relay Card

Product Description

SIM Relay Card
Automatic Self-Test
A logic only Self-Test is invoked at power on and may also be operated under software command. Self-Test pass is indicated on a PCB mounted LED with a full pass/fail description available via either the I2C or RS-232 interfaces.

Connections
All control and signal lines are made using the 72 way SIM connector. There is also a 4-pin plug for connection to the I2C or RS-232 interface. Other connector types may be available.

Software Support
The SIM Relay Cards have a simple ASCII control language (the same commands work with either I2C or RS-232). Pickering also have drivers available to assist with software development and debugging for NI LabView.

Microcontroller Based Design
The SIM Relay Card has a built-in single chip microcontroller. Each SIM Relay Card has a standard hardware selectable I2C or RS-232 interface with read/write capability. Leaded reed relays are used throughout to simplify maintenance operations.

I2C Communication
The SIM Relay Card uses a message based method of communication with the controller, all data is exchanged through a single read/write register. A DIP switch is provided for I2C addressing. This controls addressing bits 4 to 1, in addition jumpers are available for bits 5 to 7 (if required). All 7 address bits are also available on the SIM connector, allowing the I2C address to be read from the motherboard.

RS-232 Port
The SIM Relay Card can alternatively be configured with an RS-232 port (9600 baud, 8 bit, no parity, no handshaking). This is provided on a 4 pin Molex type connector (a jumper on the PCB selects RS-232 or I2C use for this port). A separate adapter lead to allow use with a standard 9 pin D-type is available. The RS-232 port allows the SIM Relay Card to be controlled and monitored from any RS-232 terminal.

RS-232 to I2C Converter Module
The RS-232 to I2C converter 1080-001 allows control of multiple relay cards that are set for I2C operation. Like the relay cards, the module uses the SIM card mechanical profile
SIM Relay Card

Company Details

Home | Members.Benefit | Privacy.Policy | Bookmark.This.Page | Contact.Us
© 2006 - 2007 4engr. All Rights reserved |Recommended Engineering Sites:| Center for Respect of Life and Environment | Internet Dictionary|Enginering intent(Engineering Events) | Map Archive