| | | | |
| Tubes |
Tube |
Polymer and Plastic Composites |
 |
Unlike conventional filament winding, ACP's tubes are manufactured by using a
unique production process whereby longitudinal fibers are oriented to provide
excellent tensile, compressive, and flexural properties. Circumferential
windings between... more |
|
|
| WOVEN FABRICS |
Plastics are Polymers |
Polymer and Plastic Composites |
 |
S Glass uses a unique chemical fommulation which results in a stronger, tougher, and stiffer fabric than E Glass. S Glass is approximately 25% stronger than E Glass. One ply of S Glass can replace several plys of E Glass resulting in a considerably lighter... more |
| Spyderfoam |
Plastics are Polymers |
Polymer and Plastic Composites |
|
New product developed expressly for composite construction. Spyder foam has two times the compressional strength of blue foam and greater shear strength. Spyder foam's unique design incorporates a fine cell structure that is alinged perpendicular to the... more |
| Mats |
Plastics are Polymers |
Polymer and Plastic Composites |
|
ACP's carbon mat is an advanced nonwoven carbon fiber mat incorporating 100% carbon fibers (approx. 1" in length) bonded together in a random fiber matrix. Carbon mat is compatible with all epoxy and polyester resin systems. It is especially useful for... more |
| Laminated Panels |
Plastics are Polymers |
Polymer and Plastic Composites |
|
ACP's carbon/balsa panels consist of two plys of unidirectional carbon fiber skins, layed up 0-90 degrees and bonded to an end grain balsa core. This lay-up offers a panel which is lighter than, but with the same stiffness and strength as Lite-Ply or... more |
| Fiberglass Sheets |
Plastics are Polymers |
Polymer and Plastic Composites |
|
Glass-Ply is a cured epoxy/fiberglass sheet which is available in four thicknesses: .005", .010", .015", and .020". The .005" and .010" sheet can be used to sheet foam wings on slope soarers or gliders. The .015" and .020" sheets can be used for hatches... more |
| Vacuum Pumps |
Vacuum Pump |
Test and Measurement Equipment |
|
Representative sales force of manufacturer\'s producing ion pump, cryopump, mechanical pump, turbomolecular pump, turbo pump, blowers, diffusion pump, and turbo pumping stations... more |
| 9000 Series Mini-Jet Central Vacuum Pump |
Vacuum Pump |
|
 |
The popular, non-electric mini-jet offers the ultimate in
versatility utilizing an existing STP’s product flow to create vacuum for
vapor recovery. One Mini-Jet can handle eight fueling positions with four
nozzles in simultaneous full flow operation... more |
| No-Clog Air Exhaust Silencer - Pneumatic Muffler |
|
|
|
No-Clog Air Exhaust Silencers are used to quiet air exhausted from pneumatic air tools, industrial air guns, blow molds, air cylinders and other air/pneumatic systems. Use where contaminants ordinarily clog air silencers on air tools. Can also be used... more |
| Oil Skimmer with Variable Speeds |
|
|
|
Compact Design Fits in Tight, Awkward and Confined Locations.
Rugged Aluminum and Steel Construction.
Motor housing is sealed to prevent splashed liquids from damaging the motor and extend its’ life in harsh or dirty environments... more |
| Adjustable Thin Corner Edge Clamp |
|
|
|
Thin (0.06”) cutout ends allows holding very thin workpieces, corners of workpieces, or circular workpieces.
Provides 1.25” clamping travel range when used with an Adjustable Hex Workstop.
Tightening the included flat head screw moves the... more |
| Adjustable Corner Edge Clamp |
|
|
|
Cutout on ends allows holding corners of workpieces or circular workpieces.
Provides 1.25” clamping travel range when used with an Adjustable Hex Workstop.
Tightening the included Flat Head Screw moves the clamp towards the workpiece.
... more |
| Adjustable Edge Clamp |
|
|
|
Provides 1.25” clamping travel range when used with an Adjustable Hex Workstop.
Tightening the included Flat Head Screw moves the clamp towards the workpiece.
Numbered locations for repeatable setup.
Hardened steel - black oxide construction... more |
| Adjustable Hex Workstop |
|
|
|
Varying distances from each edge to the central hole (0.050” each step) allows adjusting workpiece location.
Numbered locations allow for repeatable setup.
Steel - black oxide construction.
Low profile - 3/16” (0.1875”)... more |
| Adjustable Hex Workstop and Edge Clamps for Workholding and Fixturing |
|
|
|
Low profile for tight workpiece clearance.
For use on the Vac-Vise Vacuum Chuck, Pallet-Vise, 2L Complete Vacuum Systems, or other work holding systems.
Tightening the standard screw moves the Edge Clamp toward the workpiece to hold workpiece... more |
| Adjustable Hex Workstop |
|
|
|
Varying distances from each edge to the central hole (0.050” each step) allows adjusting workpiece location.
Numbered locations allow for repeatable setup.
Steel - black oxide construction.
Low profile - 3/16” (0.1875”)... more |
| Adjustable Hex Workstop and Edge Clamps for Workholding and Fixturing |
|
|
|
Low profile for tight workpiece clearance.
For use on the Vac-Vise Vacuum Chuck, Pallet-Vise, 2L Complete Vacuum Systems, or other work holding systems.
Tightening the standard screw moves the Edge Clamp toward the workpiece to hold workpiece... more |
| Complete Air Venturi Vacuum Generator Pump and Vac-Vise Vacuum Chuck System |
|
|
|
For workholding and fixturing using the Vac-Vise Vacuum Chuck and our 2L Air Venturi Vacuum Generator as the Vacuum Source. This Complete System has everything you need to use the Vac-Vise Vacuum Chuck System with Venturi Vacuum from 2L. Purchase this... more |
| Electric Vacuum Pump - Portable Oilless High Vacuum Pump System for Creating a Vacuum for Workholding |
|
|
|
For workholding and fixturing using Vac-Vise Vacuum Chuck or other vacuum workholding systems.
Use the Oilless Electric Vacuum Pump with your own vacuum chuck system or with the 2L Vac-Vise Vacuum Chuck System. Or, order a Complete Vac-Vise... more |
| Vac-Vise Vacuum Chuck Kits |
|
|
|
Use a Single Vac-Vise Vacuum Chuck System, or any of our kits which combine 2, 3 or 4 Vac-Vise Vacuum Chuck Pallets to increase the workholding area. Four preconfigured Vacuum Chuck Pallet Kits are available for ease of ordering.
Single Pallet... more |
