| | | | |
| COORDINATED MOTION / CNC |
Control System |
Motion and Controls |
 |
Overview
Our PIC-SERVO SC controllers can be used for coordinated motion in one of two ways:
They can be used in Step and Direction mode with CNC or
other types of control systems designed... more |
|
|
| No-Clog Air Exhaust Silencer - Pneumatic Muffler |
|
|
|
No-Clog Air Exhaust Silencers are used to quiet air exhausted from pneumatic air tools, industrial air guns, blow molds, air cylinders and other air/pneumatic systems. Use where contaminants ordinarily clog air silencers on air tools. Can also be used... more |
| Oil Skimmer with Variable Speeds |
|
|
|
Compact Design Fits in Tight, Awkward and Confined Locations.
Rugged Aluminum and Steel Construction.
Motor housing is sealed to prevent splashed liquids from damaging the motor and extend its’ life in harsh or dirty environments... more |
| Adjustable Thin Corner Edge Clamp |
|
|
|
Thin (0.06”) cutout ends allows holding very thin workpieces, corners of workpieces, or circular workpieces.
Provides 1.25” clamping travel range when used with an Adjustable Hex Workstop.
Tightening the included flat head screw moves the... more |
| Adjustable Corner Edge Clamp |
|
|
|
Cutout on ends allows holding corners of workpieces or circular workpieces.
Provides 1.25” clamping travel range when used with an Adjustable Hex Workstop.
Tightening the included Flat Head Screw moves the clamp towards the workpiece.
... more |
| Adjustable Edge Clamp |
|
|
|
Provides 1.25” clamping travel range when used with an Adjustable Hex Workstop.
Tightening the included Flat Head Screw moves the clamp towards the workpiece.
Numbered locations for repeatable setup.
Hardened steel - black oxide construction... more |
| Adjustable Hex Workstop |
|
|
|
Varying distances from each edge to the central hole (0.050” each step) allows adjusting workpiece location.
Numbered locations allow for repeatable setup.
Steel - black oxide construction.
Low profile - 3/16” (0.1875”)... more |
| Adjustable Hex Workstop and Edge Clamps for Workholding and Fixturing |
|
|
|
Low profile for tight workpiece clearance.
For use on the Vac-Vise Vacuum Chuck, Pallet-Vise, 2L Complete Vacuum Systems, or other work holding systems.
Tightening the standard screw moves the Edge Clamp toward the workpiece to hold workpiece... more |
| Adjustable Hex Workstop |
|
|
|
Varying distances from each edge to the central hole (0.050” each step) allows adjusting workpiece location.
Numbered locations allow for repeatable setup.
Steel - black oxide construction.
Low profile - 3/16” (0.1875”)... more |
| Adjustable Hex Workstop and Edge Clamps for Workholding and Fixturing |
|
|
|
Low profile for tight workpiece clearance.
For use on the Vac-Vise Vacuum Chuck, Pallet-Vise, 2L Complete Vacuum Systems, or other work holding systems.
Tightening the standard screw moves the Edge Clamp toward the workpiece to hold workpiece... more |
| Complete Air Venturi Vacuum Generator Pump and Vac-Vise Vacuum Chuck System |
|
|
|
For workholding and fixturing using the Vac-Vise Vacuum Chuck and our 2L Air Venturi Vacuum Generator as the Vacuum Source. This Complete System has everything you need to use the Vac-Vise Vacuum Chuck System with Venturi Vacuum from 2L. Purchase this... more |
| Electric Vacuum Pump - Portable Oilless High Vacuum Pump System for Creating a Vacuum for Workholding |
|
|
|
For workholding and fixturing using Vac-Vise Vacuum Chuck or other vacuum workholding systems.
Use the Oilless Electric Vacuum Pump with your own vacuum chuck system or with the 2L Vac-Vise Vacuum Chuck System. Or, order a Complete Vac-Vise... more |
| Vac-Vise Vacuum Chuck Kits |
|
|
|
Use a Single Vac-Vise Vacuum Chuck System, or any of our kits which combine 2, 3 or 4 Vac-Vise Vacuum Chuck Pallets to increase the workholding area. Four preconfigured Vacuum Chuck Pallet Kits are available for ease of ordering.
Single Pallet... more |
| Pallet-Vise Workholding and Fixturing System |
|
|
|
Pallet-Vise System allows easy prototyping of workpieces; eliminates the need to create custom fixtures. Use with 2L Adjustable Workstops and Edge Clamps to hold a wide variety of difficult to hold workpieces. Use one Pallet-Vise or link several together... more |
| Engraving Accessories - General |
|
|
|
Engraving and Workholding Tape
Firmly holds workpieces in position. One side has a strong permanent adhesive. The other is coated with a removable adhesive. The removable adhesive allows removal of the workpiece without damaging it or leaving... more |
| Mini Spring Loaded Engraving Tool Accessories and Replacement Items |
|
|
|
Springs provide force against the toolbit. For use with the Mini Spring Loaded Engraving Toolholders.
Light Spring - For all general purpose engraving, plastic, brass, aluminum to steel.
For use with the Mini Spring Loaded Engraving Tools... more |
| Spring Loaded Engraving Tool Accessories and Replacement Items |
|
|
|
Collets - For the Standard Spring Loaded Engraving Tool.
3/32" (.0938").
For use with the Standard Spring Loaded Engraving Tool.
Cat. No. 10056 - $13.95 each
1/8" (.125").
For use with the Standard Spring Loaded Engraving... more |
| Free Engraving Software - CNC Programming Software for CNC Mills |
|
|
|
Features of The FREE Engraving 2L Software Light Version:
Included FREE with each Spring Loaded Engraving Tool Kit purchase (Light Version of the Software is not sold separately).
Makes g code from true type fonts to program cnc milling machines... more |
| Engraving Software - CAM Program |
|
|
|
The Engraving 2L Software (Full Version):
Converts text in any font and size into standard g-code.
A single line engraving font (stick type font) is included.
Engraves Logos, Pictures, and Drawings - import and scale DXF files.
... more |
| Engraving 2L Software Single Line Fonts for use with the Engraving 2L Software Program |
|
|
|
Additional Single Line Fonts (stick type) for the Engraving 2L Software Program.
Includes a set of 6 fonts for use with the Engraving 2L and the Engraving 2L Light Version Software Programs. The font size and spacing may be changed with the Engraving... more |
