|
|
|
|
The assembly and mounting of the evaporator that goes on the processor and the mounting kit were pretty much straight forward, on both the Intel and the AMD kits. The CPU kit is both for fastening the evaporator to the CPU as well as combating condensation, which is obviously a major challenge when dealing with such low temperatures.
The minute you go below the dewpoint, condensation will occur, and it is of outmost importance to deal with this. Even more important is it when dealing with well below sub-zero temperatures.
What Chip-con has done is not much different from what I did on my homemade supercoolers -- insulate the CPU and the surroundings as well as the backside of the motherboard using a combination of a silicone sealstring and Aeroflex closed cell foam.
The rear cover, as seen in the image below, goes on the back-side of the motherboard. The metalclip and upper cover is securely fastened to the CPU socket and sealed off with the black seal string. The MicroFreezer is then screwed to the metalclip, and securely fixes the evaporator to the CPU socket. Contents of Intel EasyMod CPU Kit:
- Screws for Evaporator mounting with load springs, extra spacer rings & O-ring seals
- Roll of seal string. 5 meters.
- Upper mounting bracket with threaded holes
- Evaporator mounting Clips
- Rear Cover with mounting holes
- 4 Countersunk screws
- Rear Cover Gasket to reduce free air.
- Heat conducting compound
- Extended length Allan Key
Contents of AMD EasyMod CPU Kit
- Screws for Evaporator mounting with load springs, extra spacer rings & O-ring seals
- Roll of seal string. 5 meters
- Upper mounting bracket
- Shim plates
- Evaporator mounting Clips
- Rear Cover without mounting holes
- Rear cover gasket to reduce free air.
- Heat conducting compound
- Extended length Allan Key.
Category: Computer Hardware, Software and Peripherals
Type: Glossaries and Dictionaries
| Tags: |
- |
| Related companies: |
Composite Structures Technology, NELSON SPECIALTIES COMPANY, RX Technologies, hyphone.com.tw, Air Compressor Equipment Inc., Servicing Mission 3A, Martronics Corporation, Admiral Envelope Manufacturing Company, Inc., Crane Cams, Inc, XM Satellite Radio, Carl's Electronics, Jennic, Pervasa, Inc., Parker-Hannifin Corporation, Precision Hose Technology Inc, Aeronautical Testing Service, Inc |
| Related products: |
FIBERGLASS FABRIC, Moldmaking Rubber & Materials, Adhesive & Sealants, T-1500 Miniature I/P & E/P transducer, 1-amp buck regulator can be programmed to one of four output voltages, 1-amp buck regulator can be programmed to one of four output voltages, Fuel Pressure Regulators and Kits, Coil Clip & Locking Wire Kits for LX Coils, VIBRATION REDUCED,WELD DESTRUCT KITS & TOOLS, Promotional Items, Backend Fulfillment, Fulfillment, Insulation Kits, Fulfillment, CNC Machine Conversion Kits, Radio Kits, Transistors and Jfet's, Kitting, What I need from you:, Thru-Hole Assembly, Eflex and Powerpin Flexible Couplings, Trailer Bearing Kits, JTD Series of Differential Pressure Transmitters Model JTD910A/920A/930A/960A/921A/931A/961A, Parts & Accessories For The Air System: For Kellogg American and Ingersoll Rand Kits,Rotary Screw AirEnd Rebuilds & Rotary Vanes, Joint Direct Attack Munition (JDAM) |
| Related researches: |
A product-intent military portable power system with its Mobion®-30M product platform., Internet-Controlled Robots : Built your own |
| Related press releases: |
Sony Ericsson’s first tri-band HSDPA phone for the North American Market, Samsung introduces the power of A-VSB's Single Frequency Network (SFN) tool for the first time., Digi Releases Digi Connect ME® JumpStart Kit™ for Microsoft .NET Micro Framework at ESC Silicon Valley 2007, Three top winners of the Intel Engineering and Science Fair (Intel ISEF), presented by Agilent Technologies, $50,000 college scholarships, Guided Multiple Launch Rocket System (GMLRS) rockets purchased by the UK Ministry of Defence |
|
|
|
